LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Recommendations for a good MJ site with specs, etc...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=68&t=52361
Page 1 of 1

Author:  InCommando [ Sat May 01, 2010 3:58 pm ]
Post subject:  Recommendations for a good MJ site with specs, etc...

Also a MJ-specific lift?

Tanks Bunches

Author:  ridenby [ Sat May 01, 2010 11:09 pm ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

Not exactly MJ only but lots of good info on uni-body jeeps.scroll down the page to the topic of the month,Jeep Bible,so on

http://pirate4x4.com/forum/showthread.php?t=582126

Author:  InCommando [ Sun May 02, 2010 8:34 am ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

Thnaks! I forget about Pirate sometimes...

Author:  Chevy1500_Travis [ Wed May 05, 2010 11:34 pm ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

comancheclub.com

Author:  autoboy454 [ Mon May 17, 2010 2:51 am ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

+1 on comancheclub. I used to go there to drool over MJ's when I owned mine lol. There are also a couple good MJ builds over on JeepForum

Author:  InCommando [ Mon May 17, 2010 2:09 pm ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

I joined comancheclub.com. Good site. Thanks!

Author:  InCommando [ Tue Jun 22, 2010 11:23 am ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

Image

First pic: front bumper & stuff still off from water pump change. Only exterior rust to speak of is the little on the rocker here on the pass side.

Author:  InCommando [ Fri Jul 23, 2010 6:22 pm ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

I have found ComancheClub.com to be an excellent site and thanks to those who recommended it.

I ordered a 4.5" kit for the MJ today.... I have some 32x11.5x15's on rims that I am going to slip on it....


to do:

Front locker ( rear is LSD and expensive to lock)

297/760 front axles

Eventualy I'd like some custom bumpers...

Author:  Burchie [ Thu Aug 26, 2010 3:17 am ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

InCommando wrote:
Be sure to get an '84-'87 with a 2.8 V6, peugot 5 speed, & Dana 35 rear.

Author:  InCommando [ Thu Aug 26, 2010 9:00 am ]
Post subject:  Re: Recommendations for a good MJ site with specs, etc...

It is the perfect set-up for some :wink:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/