Quote:
3. R134 for the A/C $150
...that stuff is only like $7-8 per 12 oz can, takes about 2 cans for recharge. Even the "subzero" freeze brand is only $14-15
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What parts should I buy when installing a new engine? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=68&t=57437 |
Page 1 of 1 |
| Author: | dieselenthusiast [ Fri Dec 10, 2010 1:51 am ] |
| Post subject: | What parts should I buy when installing a new engine? |
Okay, I’m saving up for a new "remanufactured" engine for a 2000 XJ. What parts will I need to buy? Or, what else should I buy? Feel free to add to my list. Oh, and let me know if my cost estimates are too far off. 1. Water Pump $75 2. Alternator A. 136 amp that came in 1997-1998 Dodge B.Series Van $200 B. 136 amp that came in 1997-1998 Dodge Dakota $200 C. 136 amp that came in 1998 Dodge Durango $200 D. 136 amp that came in 1997-1998 Dodge Ram Pickup $200 E. 136 amp that came in 1997-1998 Jeep Grand Cherokee $200 3. R134 for the A/C $150 4. Battery $150 5. Drive Belt $30 6. Aluminum 3 core radiator A. CSF 3 core $200 B. GDI 3 core $200 7. Upper and Lower Hoses $50 8. Thermostat $10 9. Engine Mounts A. Brown Dogs $100 10. Oil and Filter $50 11. Transmission Cooler (Already have it) 12. Starter 13. Injectors 14. Exhaust A. Banks Header Part, #51306 B. Walker Front Pipe, Part #55277 C. Magna flow Converter, Part #23226 D. Dynomax catback, Part #17340 |
|
| Author: | rokee1998 [ Fri Dec 10, 2010 9:16 am ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
Rhett, the new engine should come with a gasket kit, and whomever you buy it from will prolly require you to replace some components to satisfy the warranty requirements. Your list looks great BTW |
|
| Author: | TAHOE [ Fri Dec 10, 2010 1:33 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
Quote: 3. R134 for the A/C $150 ...that stuff is only like $7-8 per 12 oz can, takes about 2 cans for recharge. Even the "subzero" freeze brand is only $14-15
|
|
| Author: | dieselenthusiast [ Fri Dec 10, 2010 2:27 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
TAHOE wrote: Quote: 3. R134 for the A/C $150 ...that stuff is only like $7-8 per 12 oz can, takes about 2 cans for recharge. Even the "subzero" freeze brand is only $14-15Yeah, I actually have two dozen cans at home.  I bought them when they were on clearance at Wal-Mart for $3.88 a can.  I was calculating the cost of labor to charge the system and replace any o-rings, etc. I’m being somewhat liberal in my estimates because I’m saving my cash flow and I don’t want to be disappointed by falling short, LOL. I’ve learned that auto projects always cost more than projected. Something unexpected will bite me in the butt, it always does.
|
|
| Author: | rokee1998 [ Fri Dec 10, 2010 2:35 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
Yeah Rhett, my 1600.00 4.0 actually ended up costing almost 2100 by the time of new fluids, a starter, and other stuff, thank goodness my Optima was under warranty 
|
|
| Author: | dieselenthusiast [ Fri Dec 10, 2010 3:21 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
rokee1998 wrote: Yeah Rhett, my 1600.00 4.0 actually ended up costing almost 2100 by the time of new fluids, a starter, and other stuff, thank goodness my Optima was under warranty Yep, that's usually how it goes.  Oh, and you reminded me, I'm going to add a Starter to the list.
|
|
| Author: | JeepBumm68 [ Fri Dec 10, 2010 10:28 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
ECM/PCM whatever works for that year $!!!, TB $(15) , do the new 03-06 manifold $!!!, and header (older ones were know to crack bad)$!!!, go ahead and upgraded to the Ford Taurus HD clutch and 7 blade fan( probably about $200), of course the standard fuel lines(fittings), Injectors, coolant overflow bottle, ummmm, ya idk past that lol. can you tell me what all the remand engine comes with on it> |
|
| Author: | dieselenthusiast [ Sat Dec 11, 2010 4:06 am ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
JeepBumm68 wrote: ECM/PCM whatever works for that year. I shouldn't need a new ECM as long as mine is working fine; however, it wouldn’t be a bad idea to have a spare one. JeepBumm68 wrote: do the new 03-06 manifold $!!!, and header (older ones were know to crack bad) I'm probably going with the Banks header JeepBumm68 wrote: Injectors Oh yes, I will add those to the list. I'm definitely replacing mine. JeepBumm68 wrote: can you tell me what all the remand engine comes with on it> I’m not sure which remanufactured engine I’m going with. I’ll start comparing the different engine manufactures when I’m ready to make the swap. I'm not trying to rush this, LOL............ Hopefully my original motor can last another year or longer. I just don't want to be caught with my pants down, so I'm preparing for the worst. |
|
| Author: | JeepBumm68 [ Sat Dec 11, 2010 8:58 pm ] |
| Post subject: | Re: What parts should I buy when installing a new engine? |
sounds good. also try find the new heads from the 03-06 wranglers. they changed just a tad bit and offer better flow, same with the manifold. Pretty much you are going to have everything from the org to change over. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|