I will be flat towing my XJ to the LJS (.Lost Jeep Safari.) this year..

This will be my first time towing an automatic equipped vehicle any distance at all..

What is the proper procedure.?

Do I have to disconnect BOTH driveshafts.? .......or just the rear and leave the transfer case in 'N'.?

Or.......?

T I A

_________________
prev Jeeps. `72 CJ, `87 XJ, `89 XJ, `90 XJ, `94 YJ, `02 KJ,
Get In - Sit Down - Shut Up & Hang On!
YouTube Videos of my Liberty at: http://www.youtube.com/results?search_q ... rch=Search

Friend of mine that towed his said he just removed front and left x-fer case in Neutral. Not positive though. I bet an RV forum could tell you or find Andy on Naxja in So-cal section as he tows his.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

Here is a good link to NAXJA for the proper techniques on flat towing an
XJ. http://www.naxja.org/forum/showthread.php?t=76258&highlight=flat+towing
NAXJA has a wealth of information, you just have to know where to look.

Brian

_________________
Everyones entitled to be stupid but you are abusing the
priviledge

1. Hook up the XJ to the tow vehicle.
2. Place transmission in NEUTRAL.
3. Place trasnfer case in NEUTRAL. (this effectively disconnects your driveshafts)
4. Shift transmission to PARK. (this stops the transmission from pumping fluid.)
5. Turn ignition key ONE CLICK counter-clockwise. Leave key in ignition. (This shuts off the vehicle while leaving the steering free to turn.)

_________________
--
Andy
Purple Is the new chrome