Tips For Valve Cover Gasket?
Page 1 of 1

Author:  Gageraid [ Fri Dec 20, 2013 12:18 pm ]
Post subject:  Tips For Valve Cover Gasket?

Will be changing out a valve cover gasket on my friend's 95 XJ in the near future.
I've replaced gaskets on a few different cars before.
Anything I need to know? Do I need sealant in addition to the gasket?
Thanks in advance.

Author:  lfhoward [ Sat Dec 21, 2013 7:05 pm ]
Post subject:  Re: Tips For Valve Cover Gasket?

There are decent instructions for that in the Haynes manual for the XJ. If your buddy is going to be working on his XJ a lot, it might be worth a few bucks to pick that up. I used my Haynes manual quite often when I had my 2000 XJ. It was the first vehicle where I learned to do a lot of the maintenance myself. Unfortunately there isn't one for the KK or I would have bought it!

Author:  Gageraid [ Sat Dec 21, 2013 11:20 pm ]
Post subject:  Re: Tips For Valve Cover Gasket?

Thanks. I'll be surprised if it's at all difficult. Can't be any harder than the valve cover gaskets on my last car.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group