I just recieved my Rusty's engine/transmission skid. It covers the engine oil pan all the way back to the belly transfer case skid. I have an automatic transmission and there is already a small piece of metal covering it. It looks like it might even be welded to the crossmember holding it in the front. It doesn't appear as though the crossmember is holding anything else up. To install this skid, do I remove the entire crossmember, or would the new skidplate fit above or below it somehow?

_________________
David
Bel Air,Md
2003 KJ Patriot Blue Sport w/mods R.I.P.
2005 Wrangler Unlimited not so stock
L.O.S.T. #082670
http://www.cardomain.com/ride/803306
http://www.cardomain.com/ride/2399643
More mods planned than money.
-----------------

"Roads, where we're going we don't need roads."

If you are talking about the TJ you remove the small skid under the transmission and it is replaced by the new engine skid.

_________________
Bill Tolle
04 Liberty Sport 4WD
05 Dodge Dakota 4DR, 4WD
06 Grand Cherokee 2WD (wife's SUV)!
04 Kubota 4WD Tractor
LOST KJ Lifetime Member 96. btolle - BT052304