it was stock when i got it, 4.0, ax15, 3.73's and dana 30/35...
i was invincible.
first mods were a snorkel, a bb and 33's
seen here:
rocks are hard to find in florida, but they exist.
old video:
i am invincible!
http://www.youtube.com/watch?v=K4O-KHFcbiInow it looks like this:
and some more recent videos...
http://www.youtube.com/watch?v=i0vRVMc8LDkhttp://www.youtube.com/watch?v=RWi74_NUQ0wit's part cj, yj, tj, chevy k 30, and dodge ram 1500.
there's a thread on btf that has the whole build condensed to a single page:
http://www.bluetorchfab.com/forum/showthread.php?t=1041but the original build thread is on my home forum.
http://www.floridajeepers.netProject SideStepspec list is currently:
k30 front and rear one ton axles. dana 60 front and a 14b rear. 5.13 gears and 39.5 boggers
1981 cj dana 300 transfer case mated to a
46re from a dodge ram 1500 which is attached to a
magnum 5.9 V8 also from a dodge ram with some mild mods and cowl snorkel.
suspension is on the front a BTF full width kit for a yj using 6 leaf yj sensored word packs
on the rear is the yj stretch kit that is supposed to use xj leaf springs, but i have stock chevy springs in there instead for a stronger springs with better anti wrap characteristics.
steering is done by BTF high steer arms, heavy wall dom, and heims.
but for florida, with recent trail legalities and closures it's a bit much for non mud trails. so i'm downsizing.
when i'm done it'll be a CYTJ20K15H2
i'm going down to 35" procomp xterrains, and a dana 60 rear and 44 front with 4.56's. axles will be from a j20. k30 parts will be dropped, but the k10 springs in the rear will stay, and the wheels are h2 wheels.
the downsizing will be happening over the next month or so. will post pics and build info if there is interest for it.
the main build thread for that is also on FJOA, but i will try and remember to cross post over here too.
3 Steps Forward, 2 Steps Back