LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

PSC mods installed
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=69&t=6690		 Page 1 of 1
Author:  LOST TJ [ Mon Mar 13, 2006 10:51 pm ]
Post subject:  PSC mods installed
We finally finished installing the PSC mods. We installed tube fenders,rocker knockers and crusher corners. I had the trail cage installed by Performace Offroad. I still have to pull the cage and paint it, put back the whole interior(only have a driver seat at the moment), relocate the front turn signals and running lights. Reinstall the Boulder Bars. Then touch up the paint on the outside of the rig. It is alot of work but i saved alot of money and got the look i was looking for. I hope to be back on the trail soon. Here are a few pics of the progress.

Last Look
Image

Stripped
Image

Jeff cutting off the fender. :shock:
Image

Trimmed
Image

Xtra parts
Image

Tube Fender Primed and mocked up in place.
Image

Some shots from today.
Image
Image
Image
Image

Next Up 35's and 5.13s :P Cya
Author:  pixeldzn [ Mon Mar 13, 2006 11:00 pm ]
Post subject: 
darn. That looks really tough. I like it.
Author:  TomCat [ Tue Mar 14, 2006 8:08 am ]
Post subject: 
Nice setup!

Need some pics of that baby crawlin'
Author:  LOST TJ [ Tue Mar 14, 2006 12:41 pm ]
Post subject: 
Thanks for the compliments. Hopefully it will be on the rocks Sunday and i'll get some action pics.
Author:  bennybmn [ Tue Mar 14, 2006 10:06 pm ]
Post subject: 
Do you have some extra tubing in the roll cage (compared to stock)?
Author:  LOST TJ [ Wed Mar 15, 2006 12:25 am ]
Post subject: 
Yes, the kit came with two dash to floor supports, two upper pillers that weld to factory windshield bars. A dash and upper windshield bar, two center spreaders and a rear spreader bar. All seen in this pic in yellow, but the rear spreader.
Image

You can kind of see them in these pics.
Image
Image

I have seen this setup used 3 times on jeffs jeep and his has always held up, even with one paticularly nasty roll. I do plan to slowly add more to it over time though. Cya
Author:  bennybmn [ Wed Mar 15, 2006 11:15 am ]
Post subject: 
Yeah it was the rear spreader bar I noticed first. Looks fantastic! And very stout. Hopefully you'll never find out :shock:
Author:  FUNNMUD [ Wed Mar 15, 2006 5:06 pm ]
Post subject: 
Looks like it is ready for some serious business :shock: ! Can't wait to see it on the trail, you two did an awesome job!

~Bethany
Author:  LOST TJ [ Wed Mar 15, 2006 7:13 pm ]
Post subject: 
Thanks Beth. I can't wait to get it out in the wash. I told Jeff and Travis what you bought and the plans you told me about and they can't wait to get thier hands on it. Let me know when you are raedy and i'll hook you up. Cya
Author:  Signcutter21 [ Sun Mar 19, 2006 1:33 am ]
Post subject: 
Travis, That looks really B.A. hope you dont have to roll it too. Anymore mods and I dont think you'll be able to have it street legal in Phoenix. I'll let you leave it here in the "old west" where they don't mind things like that. You can come drive it any time you want. lol. Seriously that is way cool looking. I have a similar roll bar set up in my CJ. Are there rear sreader bars that run the length like the front ones?
mike
Author:  LOST TJ [ Thu Mar 23, 2006 8:32 pm ]
Post subject: 
Hey Mike. I just caught this. Thanks for the compliments. I'm not really sure it is still street legal. I definitley would not pass emmisions right now.
There are no other rear spreader bars at the moment. I want to put a rack in the back and still haven't figured out the config i want. I will be adding more to it to create some triangulation. I want to add some gusseting in some places also. Like you guys said, i hope i don't have to use it.
Cya
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/