| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 95' Pathfinder Frame help. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=70&t=62718 |
Page 1 of 1 |
| Author: | KJKID [ Mon Sep 19, 2011 8:53 am ] |
| Post subject: | 95' Pathfinder Frame help. |
I just picked up a legit beater. 95 Pathfinder Im going to just pound it around my house and take it mudding, but the frame is a tad to tender. I'm going as cheap as possible. I'd like to fix this for like nothing, as I only paid $50 for the rig. My idea is to weld some 1/8 inch thick patches, then take roofing tar, get it to about a boil so its quite thin, and then just slap it on the whole thing. I've got some tar left over, and plenty of scraps, so I could do this for free. Any better "redneck" cheap ways of doing it? |
|
| Author: | RENE [ Tue Sep 20, 2011 6:52 pm ] |
| Post subject: | Re: 95' Pathfinder Frame help. |
I worked in Nissan dealership for 30 years,the Pathfinders used to rust besides the rear wheels at the frame. I had a shop that would weld a piece of steel on the side of the frame, worked ok for a cheap fix. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|