Heres some pictures of my '91 Ford Explorer. I've built a long arm suspension in the front for a High pinion D30, using Wild Horse 3 1/2" coils, and a stock XJ panhard bar & mount. The rear axle is a 31 spline 8.8" w/ an Aussie locker. I'm using the stock leaf springs, but did a SOA to gain around a 5" lift. I've built a rear bumper that has 1 tow point, and I just finished a front bumper w/ 2 tow points and is made from 3/8" plate. Currently, my automatic transmission has finally died so I'm swapping in a Mazda 5spd (M5R1) and redoing the front suspension using Fullsize Ford radius arms. During the summer I will be cutting the rear portion of the roof off and building a full roll cage. This has turned out to be quite the project! Enjoy the pictures!
