LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Jeep parts questions
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=70&t=75626
Page 1 of 1

Author:  Jeeper4life [ Mon Jun 17, 2013 6:17 pm ]
Post subject:  Jeep parts questions

Looking to go to the junkyard here before summer is over in search of some parts for both jeeps.. First question, I'm looking for a HP D30, maybe two, I have to get one out of a cherokee right? What year(s) do I need to look for in order to find one? and while I'm dicking with that said cherokee I can use its front driveshaft for an SYE rear driveshaft on a TJ right? I know it will need cut down to length and what not. Does the front driveshaft have to come out of an auto? 5 speed? doesn't matter? Do years matter for the front driveshaft? Thats it for my questions as of right now..Thanks for any help!

Author:  Jeeper4life [ Tue Jun 25, 2013 10:33 pm ]
Post subject:  Re: Jeep parts questions

I found what I was looking for, still wouldn't mind picking up second HP 30 for the KJ SFA swap in the future :D but this one is for the TJ..
My new to me HP Dana 30..
Image
XJ front driveshaft..
Image

and some spare 8.25 axle shafts for the KJ got thrown in on this deal..
Image

Author:  Black Sheep Fabworx [ Wed Jul 24, 2013 3:00 pm ]
Post subject:  Re: Jeep parts questions

Year doesn't matter for the drive shaft, there pretty much all the same. Just make sure the double cardan is in good shape, and its not a cv. As for the axle, 90+ Cherokee without the disconnect. The disco axles are pure junk. They stopped using the HP in later years, I'm not sure when the change started. Look for a 4cyl Jeep, you might get lucky and find one with 4.10 gears, the rest will be 3:55, or a rare few 3:73 :JEEPIN:

Author:  Jeeper4life [ Sat Jul 27, 2013 11:59 am ]
Post subject:  Re: Jeep parts questions

The one I found has 3.55's Doesn't matter though, its gonna get regeared anyway and locked. heh

Author:  audiboy86 [ Sun Jul 28, 2013 9:48 pm ]
Post subject:  Re: Jeep parts questions

There are a lot of preset up hp44 out this way I run across them on Craigslist all the time around here.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/