| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| part? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=31028 |
Page 1 of 1 |
| Author: | dloc_jeep_KJ [ Sat Mar 29, 2008 5:48 pm ] |
| Post subject: | part? |
how much of this stuff can i use for a SAS? i know they might not really be the best axles but it might be a start  i also found a ford 9 and a D44 would that be the better way to go? im not really sure either would work and i know i wouldnt want the D35 and would just keep the 8.25 in the rear.
http://www.4x4grace.com/vBulletin/showthread.php?t=3429 |
|
| Author: | JJsTJ [ Sun Mar 30, 2008 8:55 am ] |
| Post subject: | |
No good. You don't want either axle. The disco axle is wrothless as is thee d35. Pass on it and shop around. |
|
| Author: | dloc_jeep_KJ [ Sun Mar 30, 2008 2:19 pm ] |
| Post subject: | |
kinda what i figured. thanks for the input. oh and i didnt want a D35. |
|
| Author: | Christopher [ Sun Mar 30, 2008 4:31 pm ] |
| Post subject: | |
You can convert that disconnect and put a solid axle shaft through and a block off plate. Thats what I did on my comanche. 75 bucks is pretty cheap if you get the knuckles and brakes. just a thought. Chris |
|
| Author: | dloc_jeep_KJ [ Mon Mar 31, 2008 11:51 am ] |
| Post subject: | |
im going to pass on this one. still not sure if im going to go with a HP D30 or a HP D44. i should start buying parts next month. im also going to try to do this kinda on the cheap side(only some parts) and build it up better later. being a college student and having a 6 month old makes this take a little longer for me  i might get a loan though
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|