| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| dream kj sas http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=32637 |
Page 1 of 1 |
| Author: | bearmedic [ Mon May 19, 2008 7:44 am ] |
| Post subject: | dream kj sas |
hey guys and gals (gotta be politically correct) if you had 8 grand to do a solid axle swap what parts would you use ad or modify the part list if i leave something out add it and the approx price lets see what great mnds can come up with. rules are you have to clear 265 75 17 tires and support the front end with an arb bumper and winch. suspension: fabtech dirt logic coil overs 600.0 dana 44 front: junk yard find 500.00 axle rebuild : gears shats locker 1200.00 rubicon express track arms 400.00 skid plates 800.00 (price of 1/8" sheet of steel) what steering box t case and drve shafts should be use im thinking an atlas t case but not quite sure, if we hit the money this may be a project build when i get home in july. gotta love tax free pay lol. |
|
| Author: | tjkj2002 [ Mon May 19, 2008 7:54 am ] |
| Post subject: | |
Quote: rubicon express track arms 400.00 The RE arms are about $1200 for the full set.
'90-'91 Ford "F" series steering box(or BroncoII) is the one to use. The RockTrac t-case(from a Rubicon,4:1 low) is about $1700 new,Atlas 4.3:1 t-case is about $2500. You need a custom made belly pan to mount the long arms,1/8" won't cut it,you need at least 1.4". |
|
| Author: | InCommando [ Mon May 19, 2008 10:54 am ] |
| Post subject: | |
I'm not sure what axles you are looking to run, or what you are sourcing your front from. Your front D44 could be sourced from a FSJ for about $100-$150 most places. Heck, for the cost of fabrications time & metal, you could swap a matching set of anything in. It is not unusual to get matching set of FSJ axles for $250. Just a thought. Also, a HP D30 is capable of supporting a 32"-ish tire just fine. You might look in to one of those. |
|
| Author: | Milner [ Mon May 19, 2008 10:59 am ] |
| Post subject: | |
Dana 44 cromo shafts and hardened ujoints, detroit. Summit Machine joints and aluminum links. Driveshafts from any custom builder using spicer parts. Fox coilovers (Best value imho) Atlas 4spd or Stax 3spd case Custom link mounts and skid plates. Doing the work myself, should be close on the $8k As long as we are dreaming, I would put a tru-hi 9" in the back too. Add custom links and mounts there too 
|
|
| Author: | bearmedic [ Mon May 19, 2008 3:28 pm ] |
| Post subject: | |
well i wasnt thinking on the front just do like a three link set up have two control arms by the shock mounts and then have a third next to the pumpkin but having all to angle up to add additonal ground clearance, and the front would be from a pull a part style junk yard and i though bout a hp d30 but if i can mount a 44 up front why not, it would be nice if i could matching set but that is two sets or gears and two lockers, and re welding both for coil perches, although changing out the rear control arms wiht the re is a good add on too. |
|
| Author: | tjkj2002 [ Mon May 19, 2008 8:37 pm ] |
| Post subject: | |
Quote: although changing out the rear control arms wiht the re is a good add on too. You would want long arms F and R,otherwise very funny handling will result(and very unsafe).You also might want to do a 5 link F/R to be street friendly,safier also,but more $$$$.
|
|
| Author: | bearmedic [ Tue May 20, 2008 1:22 pm ] |
| Post subject: | |
well here is the most accurate price list i have at this time from the parts research ive done, it puts me over my 8000 limit but i dont think 8 grand would be a "budget" kit all these prices are for new parts. atlas 2 transfer case 1895 dana 44 axle built 2295 RE front ca 860 (Wrangler long arm kit) rock crawler coilover 1800 brake components 400 steering box 300 various parts : brackets tie rods 925 still need new axle front and rear and the labor of course |
|
| Author: | tjkj2002 [ Tue May 20, 2008 8:38 pm ] |
| Post subject: | |
Good luck trying to get a new Atlas t-case for $1895,better add about $300-$400 at least to that for shifters,yokes,and the 32 spline front(all optional). |
|
| Author: | ohv_kj [ Tue May 20, 2008 9:08 pm ] |
| Post subject: | |
2200$ for that puppy |
|
| Author: | bearmedic [ Wed May 21, 2008 4:14 am ] |
| Post subject: | |
yeah that was the price i got off hte advanced webpage, for th particular tcase iw as looking for if i knew where to get one of the rubicon t cases i would go with it does anyone know where to get one beside ordering it from chrysler? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|