JJsKJ wrote:
PM me what measurements you need and I'll see what I can do to help.
Hey there! remember me? The guy that posted that little tidbit above?
I have the Nth setup and can get you measurements. Let me know what you need measured.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| another one bites the dust http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=38801 |
Page 1 of 1 |
| Author: | wolfman1722 [ Thu Jan 01, 2009 11:40 pm ] |
| Post subject: | another one bites the dust |
Well I have been talking to marlin at jba and he is going to build me 10inch rear springs and put johnny joints on his long arms. I'm going to have him custom fab me front long arms but I need some mesurements off the nth degree kit. So if any one can get those it would be great. Also wondering what people have used for the front track bar. |
|
| Author: | tjkj2002 [ Thu Jan 01, 2009 11:43 pm ] |
| Post subject: | |
Custom making both of my track bars(front and rear) from 1.25x0.281 walled DOM tubing and Jonny Joints on both ends. |
|
| Author: | wolfman1722 [ Fri Jan 02, 2009 1:01 am ] |
| Post subject: | |
I'm hoping some one on here used a prefabed track bar for another aplication |
|
| Author: | JJsTJ [ Fri Jan 02, 2009 1:29 am ] |
| Post subject: | |
PM me what measurements you need and I'll see what I can do to help. |
|
| Author: | ohv_kj [ Fri Jan 02, 2009 11:09 am ] |
| Post subject: | |
nope custom one for me too... i have no trac bar in the rear... |
|
| Author: | wolfman1722 [ Fri Jan 02, 2009 11:11 am ] |
| Post subject: | |
Who's using the nth degree long arms |
|
| Author: | JJsTJ [ Fri Jan 02, 2009 12:19 pm ] |
| Post subject: | |
JJsKJ wrote: PM me what measurements you need and I'll see what I can do to help.
Hey there! remember me? The guy that posted that little tidbit above?
I have the Nth setup and can get you measurements. Let me know what you need measured.
|
|
| Author: | wolfman1722 [ Fri Jan 02, 2009 12:30 pm ] |
| Post subject: | |
I need the mesurement from were long arms meet the axle to were the secondary arm splits off to the top of the diff and I also need from the passanger side how tall the bracket is and sorry I thought you were talking about the track bar not the long arms |
|
| Author: | JJsTJ [ Fri Jan 02, 2009 4:50 pm ] |
| Post subject: | |
Front arms are 36" log overall from lower mount back to frame mount. From upper mount back to the arm, the upper portion is about 22.5". Driver side upper mount is about 6" tall off the axle tube. You could double check that on whatever axle you are using though. The front axle is using the stock TJ/XJ style mounts. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|