LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Dana 30 from a Grand Cherokee 2000
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=40666		 Page 1 of 1
Author:  ChileanKJ [ Wed Feb 25, 2009 11:44 pm ]
Post subject:  Dana 30 from a Grand Cherokee 2000
May be I'll start to collect things, does this axle work for a SFA? it has ABS, can i keep the ABS with the SFA? it's 300 bucks.
Author:  tjkj2002 [ Wed Feb 25, 2009 11:53 pm ]
Post subject:  Re: Dana 30 from a Grand Cherokee 2000
ChileanKJ wrote:
May be I'll start to collect things, does this axle work for a SFA? it has ABS, can i keep the ABS with the SFA? it's 300 bucks.
It's a low pinion D30,has CV axles in it,and not worth $300 and the modifications need to run 33"+ tires would take the ABS feature away.Look for a '97-'99 XJ front diff,they are the HPD30's and can be found for $100 most times,or if you must keep the ABS the new JK D44's are the way to go.
Author:  ohv_kj [ Thu Feb 26, 2009 12:09 am ]
Post subject: 
go w/ a big axle...the only reason i didn't at first was to get it done and save some time and money down the road...
Author:  jsc7002 [ Thu Feb 26, 2009 1:32 am ]
Post subject:  Re: Dana 30 from a Grand Cherokee 2000
tjkj2002 wrote:
ChileanKJ wrote:
May be I'll start to collect things, does this axle work for a SFA? it has ABS, can i keep the ABS with the SFA? it's 300 bucks.
It's a low pinion D30,has CV axles in it,and not worth $300 and the modifications need to run 33"+ tires would take the ABS feature away.Look for a '97-'99 XJ front diff,they are the HPD30's and can be found for $100 most times,or if you must keep the ABS the new JK D44's are the way to go.


is the JK D44 the same width as the C8.25"?
Author:  tjkj2002 [ Thu Feb 26, 2009 1:34 am ]
Post subject:  Re: Dana 30 from a Grand Cherokee 2000
jsc7002 wrote:
tjkj2002 wrote:
ChileanKJ wrote:
May be I'll start to collect things, does this axle work for a SFA? it has ABS, can i keep the ABS with the SFA? it's 300 bucks.
It's a low pinion D30,has CV axles in it,and not worth $300 and the modifications need to run 33"+ tires would take the ABS feature away.Look for a '97-'99 XJ front diff,they are the HPD30's and can be found for $100 most times,or if you must keep the ABS the new JK D44's are the way to go.


is the JK D44 the same width as the C8.25"?
No,it's about 4"-5" wider.
Author:  jsc7002 [ Thu Feb 26, 2009 2:08 am ]
Post subject:  Re: Dana 30 from a Grand Cherokee 2000
tjkj2002 wrote:
jsc7002 wrote:
tjkj2002 wrote:
ChileanKJ wrote:
May be I'll start to collect things, does this axle work for a SFA? it has ABS, can i keep the ABS with the SFA? it's 300 bucks.
It's a low pinion D30,has CV axles in it,and not worth $300 and the modifications need to run 33"+ tires would take the ABS feature away.Look for a '97-'99 XJ front diff,they are the HPD30's and can be found for $100 most times,or if you must keep the ABS the new JK D44's are the way to go.


is the JK D44 the same width as the C8.25"?
No,it's about 4"-5" wider.


okay thats what I thought, its pretty much just the HP D30 and the old D44 from an EB that works with the C8.25"?
Author:  ChileanKJ [ Thu Feb 26, 2009 12:39 pm ]
Post subject: 
Ok I'll let the axle pass, but about the ABS, the only difference is the sensor at the wheel hub right?, so if I find a way to use the same sensor from the KJ to the HPD30 I will have ABS? or am I missing something?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/