no it was fouros KJ that he keep stateside
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Who owns the Red SFA kj I just saw on TV? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=43097 |
Page 1 of 3 |
| Author: | omGoddard [ Tue May 12, 2009 2:01 am ] |
| Post subject: | Who owns the Red SFA kj I just saw on TV? |
Was sitting here watching 4 Wheeler Offroad Ultimate Adventure on the Outdoor channel. They were all up the east coast..NC, TN, mudding, rock crawling etc. Kept showin' clips of a red SFA kj w/ gold lettering on the top windshield. It had that one nice bumper everyone had problems getting...$$$ too, can't think of the name, wasn't an arb/lizard/sundance. Oh well, anyone else see it? |
|
| Author: | Guest [ Tue May 12, 2009 2:04 am ] |
| Post subject: | |
That was ThunderbirdJunkie's other KJ. [/lie] |
|
| Author: | Fouros [ Tue May 12, 2009 2:06 am ] |
| Post subject: | |
no it was fouros KJ that he keep stateside
|
|
| Author: | jsc7002 [ Tue May 12, 2009 3:07 am ] |
| Post subject: | |
this one?? 
|
|
| Author: | Quicksilversurf917 [ Tue May 12, 2009 9:56 am ] |
| Post subject: | |
 intersting but wow!! it looks pretty sweet
|
|
| Author: | tjkj2002 [ Tue May 12, 2009 10:22 am ] |
| Post subject: | |
jsc7002 wrote: this one?? I almost bought that in '05 when I was stationed 3 hours away from Trail Ready's company.They wanted $26,000 for it.
|
|
| Author: | JeepinJarhead03 [ Tue May 12, 2009 10:41 am ] |
| Post subject: | |
get that thing out of here, i want that rear bumper 
|
|
| Author: | tommudd [ Tue May 12, 2009 10:45 am ] |
| Post subject: | |
I tried for almost a year to buy one of those rear bumpers back in 05 finally gave up after several emails/ phone calls / discussions about when , finally wasn't worth the wait or trying to deal with them! |
|
| Author: | JJsTJ [ Tue May 12, 2009 11:25 am ] |
| Post subject: | |
Now owned by a couple in NV IIRC. Sitting on 33's w/ steps off the side so the wife can get in and out. |
|
| Author: | Inc [ Tue May 12, 2009 12:11 pm ] |
| Post subject: | |
JJsKJ wrote: Now owned by a couple in NV IIRC. Sitting on 33's w/ steps off the side so the wife can get in and out.
I know this one is or used to be a NV one: 
They painted the bumpers on the OP one apparently, I preferred the red to the yellow. And those appear to be full widths: 
|
|
| Author: | CRD Joe [ Tue May 12, 2009 12:24 pm ] |
| Post subject: | |
tjkj2002 wrote: jsc7002 wrote: this one?? I almost bought that in '05 when I was stationed 3 hours away from Trail Ready's company.They wanted $26,000 for it.Yo TJ, you talking Ft. Lewis or McCord? Years ago when I went to Trail Ready to pick up my bead lock wheels that truck was parked outside as I walked up the stairs to the office. I don't know about order issues dealing with trying to get stuff from them for KJ's, but I can tell out this, the owner of Trail Ready is one stand up guy!!!!! |
|
| Author: | tommudd [ Tue May 12, 2009 12:33 pm ] |
| Post subject: | |
Maybe a stand up guy to deal with one on one, but over the phone for close to a year he will tell you more tall tales than anyone I ever met. He should of been a politician! He should of said "i do not wish to make anymore KJ bumpers" and I would of left him alone instead of keep telling me to call back, two or three more weeks and we will have one etc. |
|
| Author: | JeepinJarhead03 [ Tue May 12, 2009 12:37 pm ] |
| Post subject: | |
i pretty much ran into the same deal as tom did with those rear bumpers, 2nd time i called and got the same 2 or 3 week statement i told them since they didn't want my money i'd give it to someone else 
|
|
| Author: | tjkj2002 [ Tue May 12, 2009 2:00 pm ] |
| Post subject: | |
Inc wrote: JJsKJ wrote: Now owned by a couple in NV IIRC. Sitting on 33's w/ steps off the side so the wife can get in and out. I know this one is or used to be a NV one: They painted the bumpers on the OP one apparently, I preferred the red to the yellow. And those appear to be full widths: http://www.sn-fab.com/projects/tractech/ |
|
| Author: | wheeee32 [ Tue May 12, 2009 2:08 pm ] |
| Post subject: | |
I like the KJ with the body matched front/rear over the one with the bananas on it.
|
|
| Author: | Inc [ Tue May 12, 2009 3:01 pm ] |
| Post subject: | |
tjkj2002 wrote: The TR SFA KJ used a LP44 in fron and the OEM 8.25 in the rear.The top pic is the Detroit Locker SFA KJ built by S&N Fab in WA for SEMA,it used RockJock60's F/R.
What size LP44 is that? I see he is using regular bucket springs and not coil overs. |
|
| Author: | jsc7002 [ Tue May 12, 2009 3:13 pm ] |
| Post subject: | |
Inc wrote: tjkj2002 wrote: The TR SFA KJ used a LP44 in fron and the OEM 8.25 in the rear.The top pic is the Detroit Locker SFA KJ built by S&N Fab in WA for SEMA,it used RockJock60's F/R. What size LP44 is that? I see he is using regular bucket springs and not coil overs. what do you mean what size? the width? 67" WMS-WMS from a Chevy 1/2 |
|
| Author: | Inc [ Tue May 12, 2009 3:32 pm ] |
| Post subject: | |
jsc7002 wrote: Inc wrote: tjkj2002 wrote: The TR SFA KJ used a LP44 in fron and the OEM 8.25 in the rear.The top pic is the Detroit Locker SFA KJ built by S&N Fab in WA for SEMA,it used RockJock60's F/R. What size LP44 is that? I see he is using regular bucket springs and not coil overs. what do you mean what size? the width? 67" WMS-WMS from a Chevy 1/2 Yes, the width was what I was referring to. Sorry, that must have been hard to figure out. |
|
| Author: | Sport [ Tue May 12, 2009 4:39 pm ] |
| Post subject: | |
jsc7002 wrote: Inc wrote: tjkj2002 wrote: The TR SFA KJ used a LP44 in fron and the OEM 8.25 in the rear.The top pic is the Detroit Locker SFA KJ built by S&N Fab in WA for SEMA,it used RockJock60's F/R. What size LP44 is that? I see he is using regular bucket springs and not coil overs. what do you mean what size? the width? 67" WMS-WMS from a Chevy 1/2 so what is the "width" of the 8.25? |
|
| Author: | tjkj2002 [ Tue May 12, 2009 5:31 pm ] |
| Post subject: | |
Inc wrote: tjkj2002 wrote: The TR SFA KJ used a LP44 in fron and the OEM 8.25 in the rear.The top pic is the Detroit Locker SFA KJ built by S&N Fab in WA for SEMA,it used RockJock60's F/R. What size LP44 is that? I see he is using regular bucket springs and not coil overs. |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|