umm i don't like the sound of not being able to do only 6'' of lift. And 14'' wide crap.

Yeah your going to have to go to at least 8" min(possibly 9"-10") to make room for everything in the front.

Ya that is what it is looking like. Will, hopefully we can see what works. I will go ahead and order for 8'' lift and see what goes from there. I am going to start with the axle here in a few weeks. Searching hard to find a dana 30 hp.

Exactly why I'm going with full width axles,going to 9" of lift so I'm going at least 7" wider in stance.

Ya but the budget doesnt allow us the ability to do that. gotta get hers up and running for 4hweeling again and this way as worked so far for a couple of people.

You can find a HP D44 and 9" pretty cheap, Ive seen some around here for $125, now granted that 9" probably isnt nodular but you can up-grade that later if you want, or a set of Dana 44 front and rear, or you can always pick up a FF 14B cheap

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/