JeepBummes SFA Part's List-Pic's Posted

JeepBumm68 · **Posted:** Fri Jul 31, 2009 10:20 am

Well i have decided to go ahead and post my parts list. Almost Finished

Front Axle- Dana 30HP(COMPLETE)-$FREE-HAVE
Poison Spyder HD Steering-$100-PURCHASED
Rear Axle- Dana 44-$400- With ARB airlocker, 4.56's-PURCHASED
Rear Disk Brakes-$ -Need
Coilovers-Fox 10''-980-99-004-197ea-off road warehouse-PURCHASHED
Coilover Uppers-QA1 Precision Products 10-300-$37-summit racing-PURCHASED
Coilover Lowers-QA1 Precision Products 10-300-$37-summit racing-PURCHASED
Rear Springs- OME 864's-$75ea-PURCHASED
Rear Shocks-Blisteins 5125's-$70 Total-PURCHASED
Front Sway Bar and Disconnects- $FREE-HAVE
Front Axle Gearing-4.56's G2-$250-PURCHASED
Front Driveshaft-$ -NEED
Rear Driveshaft-$ -NEED
Exhaust-$FREE-Rerouting Are selves
NP231 W/ SYE KIT- $300-HAVE
Long Arms-waiting
TrackBar-$FREE-HAVE

Well are parts this is almost done. We start tearing down a week from this Saturday.

Here are some Pictures...

-Fox 10'' shocks

-QA1 Coils- 300 pounds each

-NP231-AA SYE Kit

-Dana 30 HP & Dana 44

-Dana 44 Truss

-PS HD steering

-Just ya haha

There are the pic's I will make it more organized when we get them all to the barn we are using to build the jeep in. Thanks for looking.

jsc7002 · **Posted:** Fri Jul 31, 2009 12:30 pm

what size of tires is it going to have? I didnt see a front 4.88 gears on your list.

JeepBumm68 · **Posted:** Fri Jul 31, 2009 9:53 pm

The front 4.88's are going to be there haha. I am going to have a locker and 4.88's installed when i buy the axle haha

She is running the 32's for a few months. after all this buying and getting it done, wont have money for tires. But by December Santa is going to bring KM2 35's, with some 15x8 crager soft 8's

jsc7002 · **Posted:** Fri Jul 31, 2009 11:21 pm

sounds good, what lockers are you getting?

JeepBumm68 · **Posted:** Sat Aug 01, 2009 4:02 pm

i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.

tjkj2002 · **Posted:** Sat Aug 01, 2009 8:39 pm

JeepBumm68 wrote:

i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.

The DTT is not rated for any tire bigger then 33".

ohv_kj · **Posted:** Sun Aug 02, 2009 10:53 am

tjkj2002 wrote:

JeepBumm68 wrote:

i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.

The DTT is not rated for any tire bigger then 33".

what does that mean?? not rated?? u mean it might slip some?? it's a limited slip anyways

USAFCOP · **Posted:** Sun Aug 02, 2009 12:19 pm

Talking about strength of the unit, not slippage, when they test them, they look at how much it would take to break it, and 35s were the fringe of acceptability for their legal people. It is the same with anything else, companies will test and figure out their safe limits, but you could go bigger, just expect more risk and repairs due to overstressing designs or materials.

JeepBumm68 · **Posted:** Sun Aug 02, 2009 8:21 pm

Well ok then. I really dont care for lockers right now anyways. But found some axles that might work out. Hoping to see what years they are from now.

JeepBumm68 · **Posted:** Thu Aug 13, 2009 9:08 pm

Will, i got some parts on order finally.

Fox coilovers, with qa1 300pd springs coming.

Diggerfreek · **Posted:** Thu Aug 13, 2009 9:13 pm

Nice.... and a good price to

JeepBumm68 · **Posted:** Thu Aug 13, 2009 9:23 pm

oh yes. haha looking for good deals. now just need those rear shocks hahha

Diggerfreek · **Posted:** Thu Aug 13, 2009 9:33 pm

I know the 4wheel parts in aurora had a crap load of fox exo reservoir ones on clearance in side of the store

JeepBumm68 · **Posted:** Thu Aug 13, 2009 9:56 pm

ya i visited that one. those shocks were still about 200 a piece haha.

stilll looking right now.

Diggerfreek · **Posted:** Thu Aug 13, 2009 9:57 pm

JeepBumm68 wrote:

ya i visited that one. those shocks were still about 200 a piece haha.

stilll looking right now.

glad I didn't touch them....

JeepBumm68 · **Posted:** Thu Aug 13, 2009 10:00 pm

haha you know you want them though. come one. get them

Diggerfreek · **Posted:** Thu Aug 13, 2009 10:02 pm

nope... no sfa till I roll it or pay it off.... which ever comes first :lol:

JeepBumm68 · **Posted:** Thu Aug 13, 2009 10:06 pm

haha. you dont need an sfa to use them haha

JeepBumm68 · **Posted:** Tue Sep 01, 2009 9:34 pm

NEW pics posted.

We start tear down a week from this Saturday.

Inc · **Posted:** Tue Sep 01, 2009 10:17 pm

Get heavier rated springs for your coilovers. I had lighter duty ones and they just plain don't work. I am running 450 upper 500 lower, but JJ, OHV, Wally and Seth all ran 450 & 550.

JeepBummes SFA Part's List-Pic's Posted

Who is online