LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JeepBummes SFA Part's List-Pic's Posted
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=45468		 Page 1 of 2
Author:  JeepBumm68 [ Fri Jul 31, 2009 10:20 am ]
Post subject:  JeepBummes SFA Part's List-Pic's Posted
Well i have decided to go ahead and post my parts list. Almost Finished

Front Axle- Dana 30HP(COMPLETE)-$FREE-HAVE
Poison Spyder HD Steering-$100-PURCHASED
Rear Axle- Dana 44-$400- With ARB airlocker, 4.56's-PURCHASED
Rear Disk Brakes-$ -Need
Coilovers-Fox 10''-980-99-004-197ea-off road warehouse-PURCHASHED
Coilover Uppers-QA1 Precision Products 10-300-$37-summit racing-PURCHASED
Coilover Lowers-QA1 Precision Products 10-300-$37-summit racing-PURCHASED
Rear Springs- OME 864's-$75ea-PURCHASED
Rear Shocks-Blisteins 5125's-$70 Total-PURCHASED
Front Sway Bar and Disconnects- $FREE-HAVE
Front Axle Gearing-4.56's G2-$250-PURCHASED
Front Driveshaft-$ -NEED
Rear Driveshaft-$ -NEED
Exhaust-$FREE-Rerouting Are selves
NP231 W/ SYE KIT- $300-HAVE
Long Arms-waiting
TrackBar-$FREE-HAVE


Well are parts this is almost done. We start tearing down a week from this Saturday.

Here are some Pictures...

Image-Fox 10'' shocks
Image-QA1 Coils- 300 pounds each
Image-NP231-AA SYE Kit
Image-Dana 30 HP & Dana 44
Image-Dana 44 Truss
Image-PS HD steering
Image-Just ya haha


There are the pic's I will make it more organized when we get them all to the barn we are using to build the jeep in. Thanks for looking.
Author:  jsc7002 [ Fri Jul 31, 2009 12:30 pm ]
Post subject: 
what size of tires is it going to have? I didnt see a front 4.88 gears on your list.
Author:  JeepBumm68 [ Fri Jul 31, 2009 9:53 pm ]
Post subject: 
The front 4.88's are going to be there haha. I am going to have a locker and 4.88's installed when i buy the axle haha

She is running the 32's for a few months. after all this buying and getting it done, wont have money for tires. But by December Santa is going to bring KM2 35's, with some 15x8 crager soft 8's
Author:  jsc7002 [ Fri Jul 31, 2009 11:21 pm ]
Post subject: 
sounds good, what lockers are you getting?
Author:  JeepBumm68 [ Sat Aug 01, 2009 4:02 pm ]
Post subject: 
i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.
Author:  tjkj2002 [ Sat Aug 01, 2009 8:39 pm ]
Post subject: 
JeepBumm68 wrote:
i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.
The DTT is not rated for any tire bigger then 33".
Author:  ohv_kj [ Sun Aug 02, 2009 10:53 am ]
Post subject: 
tjkj2002 wrote:
JeepBumm68 wrote:
i believe the girl wants a air locker up front and a DTT in the rear. I am not sure yet.
The DTT is not rated for any tire bigger then 33".


what does that mean?? not rated?? u mean it might slip some?? it's a limited slip anyways
Author:  USAFCOP [ Sun Aug 02, 2009 12:19 pm ]
Post subject: 
Talking about strength of the unit, not slippage, when they test them, they look at how much it would take to break it, and 35s were the fringe of acceptability for their legal people. It is the same with anything else, companies will test and figure out their safe limits, but you could go bigger, just expect more risk and repairs due to overstressing designs or materials.
Author:  JeepBumm68 [ Sun Aug 02, 2009 8:21 pm ]
Post subject: 
Well ok then. I really dont care for lockers right now anyways. But found some axles that might work out. Hoping to see what years they are from now.
Author:  JeepBumm68 [ Thu Aug 13, 2009 9:08 pm ]
Post subject: 
Will, i got some parts on order finally.

Fox coilovers, with qa1 300pd springs coming.
Author:  Diggerfreek [ Thu Aug 13, 2009 9:13 pm ]
Post subject: 
Nice.... and a good price to :P
Author:  JeepBumm68 [ Thu Aug 13, 2009 9:23 pm ]
Post subject: 
oh yes. haha looking for good deals. now just need those rear shocks hahha
Author:  Diggerfreek [ Thu Aug 13, 2009 9:33 pm ]
Post subject: 
I know the 4wheel parts in aurora had a crap load of fox exo reservoir ones on clearance in side of the store
Author:  JeepBumm68 [ Thu Aug 13, 2009 9:56 pm ]
Post subject: 
ya i visited that one. those shocks were still about 200 a piece haha.

stilll looking right now.
Author:  Diggerfreek [ Thu Aug 13, 2009 9:57 pm ]
Post subject: 
JeepBumm68 wrote:
ya i visited that one. those shocks were still about 200 a piece haha.

stilll looking right now.



:shock: glad I didn't touch them....
Author:  JeepBumm68 [ Thu Aug 13, 2009 10:00 pm ]
Post subject: 
haha you know you want them though. come one. get them
Author:  Diggerfreek [ Thu Aug 13, 2009 10:02 pm ]
Post subject: 
nope... no sfa till I roll it or pay it off.... which ever comes first :lol:
Author:  JeepBumm68 [ Thu Aug 13, 2009 10:06 pm ]
Post subject: 
haha. you dont need an sfa to use them haha
Author:  JeepBumm68 [ Tue Sep 01, 2009 9:34 pm ]
Post subject: 
NEW pics posted.

We start tear down a week from this Saturday.
Author:  Inc [ Tue Sep 01, 2009 10:17 pm ]
Post subject: 
Get heavier rated springs for your coilovers. I had lighter duty ones and they just plain don't work. I am running 450 upper 500 lower, but JJ, OHV, Wally and Seth all ran 450 & 550.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/