It is currently Tue Dec 12, 2017 2:05 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 259 posts ]  Go to page Previous  1 ... 8, 9, 10, 11, 12, 13  Next
Author Message
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Sun Jan 29, 2012 5:27 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
Here's my Semi-Complete underhood.
Image
Image
And My Speedo Fix :frankie:
Image
I removed this (The ABS Module) from.....
Image
This the ABS Distribution block/Pump and plugged the module back in, The rear speed sensor sends it signal here then back out to the Speedometer, so now the Speedometer works again.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Feb 01, 2012 2:39 pm 
Offline
LOST Addict

Joined: Thu Oct 16, 2008 8:06 pm
Posts: 1028
Location: Parker,co
Which abs sensor did you tap off of?

_________________
2005 Jeep Wrangler Rubicon TJ- Impact Orange
4'' RK LA, 35's KM2's, Warn front bumper, Warn rear bumper with tire swing, Warn gas skid, Nth oil skid, 4.88's, Alloy axles shafts F&R, Rokmen Corner armor with led's, and Rokmen sliders, custom back-up lights from gen-right, piaa 510's, IPF green glow fatboy's up front.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Feb 01, 2012 5:00 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
My 04' Had the rear-end sensor on the pumpkin, but according to the wiring diagrams I looked at they are all wired to this Module before they get to the Dash. The front sensors are ABS only they don't have any impact on the speedometer at all, so you don't have to worry about them. Now I have to tear apart the dash and remove the "Brake" and "ABS" Diodes and I will be golden.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Feb 01, 2012 11:00 pm 
Offline
LOST Addict

Joined: Thu Oct 16, 2008 8:06 pm
Posts: 1028
Location: Parker,co
okay. see on the girls libby the speed sensor on ares was not on the pumpkin lol. let me know how it works for you has you put more miles on so I can do this to the libby.

_________________
2005 Jeep Wrangler Rubicon TJ- Impact Orange
4'' RK LA, 35's KM2's, Warn front bumper, Warn rear bumper with tire swing, Warn gas skid, Nth oil skid, 4.88's, Alloy axles shafts F&R, Rokmen Corner armor with led's, and Rokmen sliders, custom back-up lights from gen-right, piaa 510's, IPF green glow fatboy's up front.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Mon Feb 13, 2012 10:56 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
about 800km's more on it now over varying conditions still working good, Speedo reads dead on with the GPS. On another note My seats finally arrived I had completely forgotten about these until I got a call from the warehouse saying hey so why was I supposed to call you about order 556778? I looked it up and to my Surprise the seats had arrived :D I won't be putting them in until warmer weather tho it's -30 celsius here brrrrrrrr.

Image
Image
Image
Image

They're a lot better quality than I had expected for sure, especially after reading some reviews I guess seat of the pants and time will tell.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Tue Feb 14, 2012 8:36 am 
Offline
LOST Newbie

Joined: Fri Oct 30, 2009 9:23 pm
Posts: 56
Location: Venezuela
Looks very nice!

I would like to ask you some questions:

-Could you fit the 14" travel shocks in the rear?? or did you have to fit shorter ones?

-How is the steering feel with the aussie in front when you are in 4wd?

-In another board I read you lift the motor mounts something like 1.5", if you did that, do you need to lift the tranny mounts too?

-Did you need to cut the body or only the flares?


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Tue Feb 14, 2012 6:59 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
Chino78 wrote:
Looks very nice!

I would like to ask you some questions:

-Could you fit the 14" travel shocks in the rear?? or did you have to fit shorter ones? I did ended up using 10" shocks (12" shocks are on there way tho)

-How is the steering feel with the aussie in front when you are in 4wd? It feels pretty good on the trail only took one trip to get used to, you never notice it in 2wd which is nice

-In another board I read you lift the motor mounts something like 1.5", if you did that, do you need to lift the tranny mounts too? I only lifted the Engine, it wasn't necessary to do anything with the Trans if anything this gave me a slightly better d-shaft angle.

-Did you need to cut the body or only the flares?
I only cut the flares, so far...... :D


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Mar 14, 2012 1:17 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Nov 20, 2009 10:17 pm
Posts: 526
Location: Hermosa Beach, CA via Pittsburgh, PA
wow I really like the looks of those seats! You can run normal seatbelts and recline and they still look nice and supportive. Can you give some more info please? How easy do they install and what brand/price?
Thanks


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Mar 14, 2012 7:08 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
They are SmittyBilt XRC Seats ( http://www.smittybilt.com/product/index/36.htm I almost did the red seats but didn't wanna look all ricey) They seem really nice to sit in in the house 8) but I still haven't gotten them in there yet. They recline dead flat and yeah you can keep your factory belt which I like. I'm going to have to make some kind of adapter bracket by the looks of things but the install shouldn't be an issue really. My eventual plan is to take the back seat out and run 2 of them back there to, with a second front console Frankenstein'd in there to so there's a decent beverage holder and somewhere comfy for passengers to ride cause that bench sucks.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Fri Mar 23, 2012 6:53 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
So finally got a bumper on the front it's far from a finished product but it'll do what I need it to do for now, I still need to trim the fenders, close in the factory under head light step up, and then get the new LED turns and Markers mounted in the short run. It'll likely get some really nice Bumpers in the early fall.

Image
Image
Image

The bumper is all 1/4" and has 2 Hella Rallye 3000 Compacts with Transit 6000K HID conversions installed, and a SmittyBilt X2O 10,000lb winch running Synthetic line in the middle.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Fri Mar 23, 2012 8:08 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri May 28, 2010 5:03 am
Posts: 1421
Location: Hawaii
RED_KJ_666 wrote:
It'll likely get some really nice Bumpers in the early fall.

Image


So you are going to get new custom bumpers later? Is that one from a wrangler?

I sure like the stance of you Liberty, good work!

_________________
Image

05 CRD Sport Dark Kahki

RRO: Adventure Rack/Rails ** MOPAR: Skids/Renny Flares & 255/75r17 (32.1) BFG M/T on JK wheels ** ARB: Bumper/IPF lights/790/948/shocks ** GDE: TCM/Hot Tune ** ROCKLIZARD: Super Sliders/Komodo Bumper

My Build Thread
US Army Infantry


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Fri Mar 23, 2012 8:10 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
It's a Modded ZJ bumper, and Thanks.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Sat Mar 24, 2012 8:20 pm 
Offline
LOST Addict

Joined: Thu Oct 16, 2008 8:06 pm
Posts: 1028
Location: Parker,co
so how is everything running?

_________________
2005 Jeep Wrangler Rubicon TJ- Impact Orange
4'' RK LA, 35's KM2's, Warn front bumper, Warn rear bumper with tire swing, Warn gas skid, Nth oil skid, 4.88's, Alloy axles shafts F&R, Rokmen Corner armor with led's, and Rokmen sliders, custom back-up lights from gen-right, piaa 510's, IPF green glow fatboy's up front.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Sun Mar 25, 2012 2:13 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
Still working out tons of little quirks and oversights, The speedo is still working A-1 tho lol. Then she blew a tranny line the other day so dropping it off tomorrow to get her fixed up. I'm still waiting on the right springs to land and my slightly longer new rear bumpstops (It thinks it should eat the fender right now) then I'll get some pics/video of it doing work.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Tue Jun 19, 2012 5:37 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
So I just threw the Honey Badger into the fray to win some Lights any help would be greatly appreciated. Thanks

http://woobox.com/zm9a3n/upload/7849


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Sun Jul 08, 2012 4:45 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
Image

Finally swapped the Factory turns for Some LED's, added 5watt resistors for them to blink at a normal pace.... All the fenders and Bumper are heading out to be spray liner'd tomorrow, I'm getting it all cleaned up fro a big car show.


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Jul 11, 2012 8:01 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
So the above light setup looked retarded....... So made a few changes and got the jeep all back together finally today.
Image
Image
Image
Image
Image
Image
Image

I might still paint the belt line molding black as well before registering for the show tomorrow, I think that will look really sharp but hey that's just me.


Top
 Profile  
 
 Post subject: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Jul 11, 2012 9:16 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Oct 10, 2010 3:10 pm
Posts: 2852
Location: Somerset, Kentucky
Looking good my Canadian friend!
Eh?!?!

That Liberty has no reason not to win first place.

;)

_________________
Doorless Liberty Instructions
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=59612&p=739557#p739557


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Wed Jul 11, 2012 9:19 pm 
Offline
LOST Newbie

Joined: Fri Oct 30, 2009 9:23 pm
Posts: 56
Location: Venezuela
Now it looks better... In order to fill the 02-04 grill gap, don't you think it could be better if you swap your grill for a 05-07 model??

Did you fix the little quirks??? Finally, do you have final numbers (height)??

Nice job!!


Top
 Profile  
 
 Post subject: Re: SFA Coming up! Yeah it's outside now...... Drives Nice
PostPosted: Thu Jul 12, 2012 1:38 am 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 826
Location: Canada
Still not completely dialed in Chino have to move the rear shocks to another location and Bump stop it, as for the grille surprisingly it's hard to find a 05-07 grille up here used and I'm too cheap to buy a new one.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 259 posts ]  Go to page Previous  1 ... 8, 9, 10, 11, 12, 13  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com