LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

how do i change the bolt pattern or hub on an axle?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=63631		 Page 1 of 1
Author:  UtahBoy [ Sat Nov 12, 2011 12:43 am ]
Post subject:  how do i change the bolt pattern or hub on an axle?
Im getting an axle off a jk, the bolt pattern is different any idea's what i can do?
Author:  ridenby [ Sat Nov 12, 2011 7:32 am ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
If you need to ask about this I doubt you are ready.
Author:  RED_KJ_666 [ Sat Nov 12, 2011 3:32 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
Swap the Rear axle to match.
Author:  ridenby [ Sat Nov 12, 2011 8:45 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
RED_KJ_666 wrote:
Swap the Rear axle to match.

One of several ways.
Author:  Chino78 [ Sun Nov 13, 2011 7:03 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
A pair of these in the rear:

http://www.spidertrax.com/Jeep-JK-Conve ... egory=9997
Author:  UtahBoy [ Mon Nov 14, 2011 2:05 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
Yes Yes i am aware of the adapter. but not happy about doing. I want to do the dickcepek wheels the back space is -19 so putting on the spacer would just throw me out more. oh well the guy is selling me the axle for only 100 bucks and it comes with a locker already thats why im not saying no.
Author:  Xodius [ Mon Nov 14, 2011 2:16 pm ]
Post subject:  how do i change the bolt pattern or hub on an axle?
Get different rims for the rear. :) or swap the axle out.


Sent from my iPhone using Tapatalk
Author:  tommudd [ Mon Nov 14, 2011 2:57 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
UtahBoy wrote:
Yes Yes i am aware of the adapter. but not happy about doing. I want to do the dickcepek wheels the back space is -19 so putting on the spacer would just throw me out more. oh well the guy is selling me the axle for only 100 bucks and it comes with a locker already thats why im not saying no.

Even with 100 bucks is it worth it in the long run?
Which diff is it, what gears etc
Some are cheaper to forget about them and get something that works better and easier
Author:  audiboy86 [ Mon Nov 14, 2011 7:59 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
If it is a rear axle just swap the axle shafts with a set that are the right length and spline count just with your desired bolt pattern.
Author:  UtahBoy [ Mon Nov 14, 2011 9:03 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
Its off of the new JK. the guy didnt go over much with me just said he would to help another guy out with a jeep to build. and its the front axle
Author:  teckman02 [ Mon Nov 14, 2011 9:42 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
UtahBoy wrote:
Its off of the new JK. the guy didnt go over much with me just said he would to help another guy out with a jeep to build. and its the front axle


it is a JK dana 30 or 44 and what locker is in it?
Author:  RED_KJ_666 [ Mon Nov 14, 2011 9:52 pm ]
Post subject:  Re: how do i change the bolt pattern or hub on an axle?
One of the good things is I believe that the JK Axles (44 and 30 alike) have a WMS-WMS of 61.9" that will make getting the coilovers in a good spot a little easier, The KJ Rear Chrysler 8.25" is 62.5" WMS-WMS and the XJ Dana 30 some of us are running is 58.5" WMS-WMS. Oh yeah and rumor has it that the ABS sensors on the JK will also work with the KJ's computer, even tho I haven't seen a build that's used a JK front axle yet.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/