It is currently Thu Mar 28, 2024 6:38 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 202 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10, 11  Next
Author Message
 Post subject: Re: Surplus Dana 30
PostPosted: Mon Mar 17, 2014 7:49 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
tjkj2002, Spot on for the steering problem, Thanks… I took out the gear box and installed a new input seal and dust cover, had my buddy change the fittings on the hydro hoses an Im back in business. Now for some shake down and finishing touches... :POPCORN: Found the trany not shifting correctly :ALONE: That will have to be pulled and sent to GDE for a ref lash or a new one… o'well… I hope thats the last of the bugs :ROTFL: :ROTFL: :ROTFL: :ROTFL: :ROTFL: :ROTFL: :ROTFL: :ROTFL: :ROTFL:

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Mar 19, 2014 9:36 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
:banghead: :banghead: :banghead: The brain fight continuous…. I am in LIMP mode going to Limp to a Transmission shop in the morning… I replaced the 3 sensors on the outside of the transmission but still in limp mode maybe the module inside??????????? Tomorrow is another day :dizzy: :dizzy:

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Mar 19, 2014 9:51 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
bshooter wrote:
:banghead: :banghead: :banghead: The brain fight continuous…. I am in LIMP mode going to Limp to a Transmission shop in the morning… I replaced the 3 sensors on the outside of the transmission but still in limp mode maybe the module inside??????????? Tomorrow is another day :dizzy: :dizzy:

What did you do? Never seen so many electrical issues but then again mine and USAFCOP's builds required no "on vehicle" welding.


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Mar 19, 2014 10:15 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
Hobart says when I joined 2 pieces of mettle together some time during the build their must have been a gap when I arced off when starting a weld joint and the ground was lost traveling through the jeep trying to find its arc.. They said it is very un common but dose happen. Lucky Me :dead: :POPCORN: I have talked to menu people about this and no one has an answer…but Hobart.. The transmission shop will put it on the scanner tomorrow and hopefully take me out of my misery. :furious: My horn and cruse control docent work either. I think I found most of the other stuff but the Limp mode really pisses me off :5SHOTS: :5SHOTS: :5SHOTS: Dam computers. :ROTFL: :ROTFL: :ROTFL: :frankie: Do yo have any guesses Please...

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Mar 19, 2014 10:23 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Horn and cruise control is most likely the clock spring since both went out at the same time,pricey sucker and don't buy used.


If you really arc'd it that bad expect to be tracing problems for a long time.If you must weld on a vehicle always use one of these.

http://www.amazon.com/OTC-3386-Antizap-Surge-Protector/dp/B000F5JLP0


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Mar 19, 2014 10:39 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
WoW, I sure would have like to known about that right from the start… The battery and the computer were removed the whole time during welding and were sitting on a shelf on the other side of the garage. The man at hobart said to use pig tail grounding on all pieces of metal being joined and surround the area being welded if in doubt. Thanks for posting that thingamabob on Amazon, consider it mine :5SHOTS: Have any Idea about Limp Mode and no transmission codes coming up on a GDE scanner/programer?

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Thu Mar 27, 2014 10:04 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
I would like to post some pictures but this site won't let me for some reason… [url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1573_zps706c5194.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1578_zpsf1adcf32.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1577_zps16286c43.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1576_zps066cbdf9.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1575_zpse2122b1d.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1575_zpse2122b1d.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1574_zps7929f28b.jpg.html]Image[/url]/url]

_________________
Jeepin is a way of life. enjoy it!


Last edited by bshooter on Thu Mar 27, 2014 10:30 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Thu Mar 27, 2014 10:22 pm 
Offline
LOST Member

Joined: Wed Apr 11, 2012 5:23 pm
Posts: 223
[LOUDLY CRYING FACE]


Sent from my iPhone using Tapatalk

_________________
Ome927 + clevis & strut plate, Ome 948 + 2xtra iso's, Ome n131 hd, bilstein 5125 4in rears, jba A-arms, jba link extension, 265-75-16 Duratracs


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Thu Mar 27, 2014 10:44 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
I should be getting my New TCM from GDE next week :pepper: :seuss: I should be running then. I hope to have the rock sliders done and an engine skid built also. I plain to cut down the SkidRow and use it by adding 2- 13/4 bars on top of the front triangulated links, "I got a plain" :ROTFL: :ROTFL: :ROTFL: :ROTFL: :dizzy: :JEEPIN: almost their. Not sure how much I should trim down the front bumper?? But it needs a few inches cut off before hitting the trails. Tomarrow is another day :CAMPING: :CAMPING:

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Thu Mar 27, 2014 11:55 pm 
Offline
LOST Junkie

Joined: Mon Feb 04, 2013 12:27 pm
Posts: 637
Like the rockers


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Fri Mar 28, 2014 12:42 am 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
Hey Bshooter what tube notcher are you using there and what do you think of it?

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Fri Mar 28, 2014 10:26 am 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
Thanks, SKK. I'm have the JD Squared TN-100. Its a very good notcher, very well made. The next step up would be the Notchmaster. If i were to buy another notcher it would be the Notchmaster. The Notchmaster will do more then the TN-100. That being said - both use the same drill mandril and is very smooth. The TN-100 in stock form will not notch the side of a pipe. By adding a spacer and longer bolts I was able to do just that. Its all about learning how to use the tool. :dizzy: :JEEPIN: I will post another picture of the side notching I'm talking about..

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Fri Mar 28, 2014 6:59 pm 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
Thanks bshooter. Anything from JD2 rocks on quality.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Fri Mar 28, 2014 9:34 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
Heres a few pics of the side notching I was talking about… [url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1580_zpsc2f36cb4.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1579_zpsc830b3a4.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1581_zpse1bb2795.jpg.html]Image[/url]/url]

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Fri Mar 28, 2014 10:03 pm 
Offline
LOST Member

Joined: Wed Apr 11, 2012 5:23 pm
Posts: 223
I like your sliders kinda boat side style but open can't wait to see everything buttoned up


Sent from my iPhone using Tapatalk

_________________
Ome927 + clevis & strut plate, Ome 948 + 2xtra iso's, Ome n131 hd, bilstein 5125 4in rears, jba A-arms, jba link extension, 265-75-16 Duratracs


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Sat Mar 29, 2014 12:59 am 
Offline
LOST Junkie

Joined: Mon Feb 04, 2013 12:27 pm
Posts: 637
Perddy


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Sat Mar 29, 2014 12:22 pm 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
I like the fresh take on the sliders. Are you going to add another tube with the side saddle notches (between the outer tube and pinchweld tube) to help slide along rocks?

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Sat Mar 29, 2014 5:32 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
No, The one 1.75 tube that is side notched is what holds the weight of the jeep along the inside of the pinch weld allowing the the bent to cross under and rise to the outside tube. These sliders are made with 120 wall 1.75 DOM and I am trying to keep the weight to a minimum. After using them and see a need to add more it can be done :juggle: [urlImage[/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1589_zps65a5243d.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1586_zpse2bbd70f.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1585_zps127dd11b.jpg.html]Image[/url]/url]

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Wed Apr 02, 2014 9:55 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
Finally getting around to finishing the drivers side. After the passenger side is on the holes through the floor will be drilled for the vertical mounting. These critters have taken some time to make :frankie: [url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1594_zps7bc00bbe.jpg.html]Image[/url]/url][urlImage[/url][urlImage[/url][urlImage[/url]

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
 Post subject: Re: Surplus Dana 30
PostPosted: Thu Apr 03, 2014 11:41 pm 
Offline
LOST Member
User avatar

Joined: Thu Sep 23, 2010 9:32 pm
Posts: 238
Location: Panama, City FL.
In case anyone is wondering how I stuffed the 14" ORI Struts up in the engine compartment, Heres a few pics.. I do plain to Install an electric fan and a radiator and intercooler when one or the other fails in the future. Then that nasty expansion tank on the firewall can get thrown in the trash :goink: Still working on some other stuff. The Battery is in the rear now. [url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1595_zpsa3522c9a.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1596_zps9bf95692.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1597_zpsabeb4991.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1598_zps7ab91b90.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1599_zps45b25343.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1600_zps3958332e.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1601_zpsc7dda889.jpg.html]Image[/url]/url][url][URL=http://s886.photobucket.com/user/bshooterr/media/DSCN1602_zps74cedbf6.jpg.html]Image[/url]/url]

_________________
Jeepin is a way of life. enjoy it!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 202 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10, 11  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com