It is currently Thu Mar 28, 2024 5:57 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject:
PostPosted: Mon Aug 31, 2009 9:14 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
Dang-it Shaggy,where you at?You gonna come get'cha some of this?
Anybody else out there?Frank6772?

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 9:09 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
That looks good, Bub. Did you fabricate a bracket to hold it in place, or is it just sitting there? I'm pretty happy just running EHM, but I may be interested in doing the Provent if I could install it with clear hose to and from, to make sure no oil is going into my intake.

You given any thought to what you want to do? Do you feel like tackling the shift kit? I'm up for it if either of you are. Here is a link describing the install: http://liberty.eurekaboy.com/transgo.htm

I would be most concerned about:

A.) Breaking something expensive (I'm kind of clumsy. . . )
B.) Soldering the new wiring harness (did I mention I'm kind of clumsy?)

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 10:16 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
sorry about last night. phone gets spotty around here... (i think it was mine)

i have http://www.equus.com/downloads/manuals/3160.pdf scan tool (or i will by friday)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 12:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
mcinfantry wrote:
sorry about last night. phone gets spotty around here... (i think it was mine)

i have http://www.equus.com/downloads/manuals/3160.pdf scan tool (or i will by friday)


That looks exactly like the one I got. I first got one at Harbor Freight but it didn't work, then went and tried one from Wal-Mart and it worked perfectly. Do you currently have a Check Engine Light on?

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 1:04 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
No, no cel. I just needed a reader


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 3:11 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
Well if you had an EGR malfunction you would get a CEL. When the MAP sensor gets real caked up, you'll get a "Turbo Underboost" code. Here's a link to instructions for cleaning it. I'm planning on pulling mine Saturday.

http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22630

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 4:40 pm 
Offline
LOST Member
User avatar

Joined: Mon Mar 24, 2008 8:31 pm
Posts: 330
Location: Morganton, Ga
KJ 119 wrote:
Dang-it Shaggy,where you at?You gonna come get'cha some of this?
Anybody else out there?Frank6772?


Here I am!
As I was afraid, being LD weekend I am going out of town. Hate that I will miss you guys. Looks like ya'll are going to be busy. Good luck!
Bub's got good knowledge to share. Did a great job on my machine!

Have fun!

_________________
06 CRD
De Reggae Bus
GD tuned engine and trans
Provent
AirFlow Snorkel

SNORKED & TORQUED


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 10:26 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
linewarbr wrote:
That looks good, Bub. Did you fabricate a bracket to hold it in place, or is it just sitting there?

Just sitting there,I wrapped the whole thing with that insulating tape to cushin it.

shaggyislandboy wrote:
KJ 119 wrote:
Dang-it Shaggy,where you at?You gonna come get'cha some of this?
Anybody else out there?Frank6772?


Here I am!
As I was afraid, being LD weekend I am going out of town. Hate that I will miss you guys. Looks like ya'll are going to be busy. Good luck!
Bub's got good knowledge to share. Did a great job on my machine!

Have fun!

De Reggae Bus representing that clean intake.
Where you heading?Foley to see Ma?

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 01, 2009 10:28 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
i can make brackets.....


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 02, 2009 7:33 am 
Offline
LOST Member
User avatar

Joined: Thu May 28, 2009 4:31 pm
Posts: 273
Location: Metairie, La & Navarre, FL
Shag you going to Alabama? Get with Hood and see if you guys want to go for a little Eglin ride. We can show yall a diff. area. East river run could be good and wet!!

_________________
1997 TJ, 4 banger, banks monster,
6" skyjacker rr long arm with nitro shocks,
33" bfg at's on mt classic locks,
d44 front & back with 4.88's and detroits
" Who needs a trail, just make your own!"
Member:Tread Heavily, Eglin Hard Hitters


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 02, 2009 8:05 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
LW,Provent is in hand. 8)

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 02, 2009 9:20 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
crap, ill cal and get mine tomorrow... i forgot :shock:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 5:47 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
mcinfantry wrote:
crap, ill cal and get mine tomorrow... i forgot :shock:


Mcinfantry's provent....................In Hand 8)

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 5:56 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
KJ 119 wrote:
LW,Provent is in hand. 8)


Bub, you rock for picking up the Provents and your willingness to drive to Livingston Parish.

Mack, you rock for offering up your casa to complete unknowns to come invade your space.

Looking forward to meeting you guys, and enjoying some fine brisket, brew, and (hopefully) successful CRD mod installations.

Mack, should I bring any other food, or anything? I hate to come use your stuff without bringing something more than beer that you may or may not drink. I have a nice bottle of Port that you're welcome too, and I can pick up anything that needs to be added to the smorgasbord.

P.S., I'm going to pick up some heat-resistant clear hose for the Provent-to-intake line. Mack, do you want me to get you some?

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 6:08 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
LW,I forgot about the 1/2" id hose.5' :wink:
4 hose clamps for the 1"hose
2 for 1/2" hose
5 for 3/4 hose
LW you work at a plant right..................might have some hose clamps laying round :lol:
I'll pick up the fittings for you and Mac

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 9:04 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
heres MY thinking.

do what ya'll want. ill watch. i OWN the place, so i dont NEED to do much (and take away from ya'll using it)

so ill cook, be a host, ask questions and watch....

ill be glad to take donations for food/shop use. not looking for either, but i wont turn them down (usually i do)

thanks for getting my provent!

is there a way to check/clean the egr? i cleaned the map (it was very dirty) and my wife has been saying the jeep is hard to start.

i put the GDE kit on today, and will get a feedback report tomorrow. but i am curious if my egr is stuck open......


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 10:34 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
Bub, I thought it was 5' of 3/4" ID hose and 1' of 1" ID hose? Confused. . . :?

Mack, the EGR valve itself is on the back side of the engine on the turbo side. Here are some pics of the valve, http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22702 , but methinks the engine would have to come up and forward to adequately access it with man-hands. Location of the valve here: http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22703

I am pretty sure that if you have an EGR malfunction, whether stuck open or closed, you would get a CEL. Hard starting could be an issue with the fuel filter head, other members have had problems with air in the fuel because of the plug design on the head I have not had any problems, (knock knock) but still plan on installing a lift pump in the future to avoid any possible issues.

I have noticed easier starting after getting the GDE, though.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 03, 2009 10:49 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
LW,1/2"tube is for drain. :wink:

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Fri Sep 04, 2009 7:54 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
KJ 119 wrote:
LW,1/2"tube is for drain. :wink:


Ahhhhh. Gotcha. So I will pick up: 5' of 3/4" ID clear heat-resistant hose, 1' 1" ID hose, 5' of 1/2" ID hose (for drain :wink: ) and hose clamps various and sundry.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Sep 04, 2009 8:46 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
everyone have the address? how many people are coming?

im cooking 15lbs brisket and 2 racks of baby backs..... my own green bean casserole recipe and maybe baked beans.

BRING YOUR OWN DRINKS. i have ice, and water, and a fridge..... (actually 2 fridges)

i have wireless internet and a computer and wireless printer. bring your laptops if you want. also i have a shower if you want to bring a change of clothes....

heres the shop
http://gallery.me.com/ltalessi/100412/photo/web.jpg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com