It is currently Thu Mar 28, 2024 9:22 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject:
PostPosted: Thu Aug 27, 2009 7:20 pm 
Offline
LOST Member
User avatar

Joined: Thu May 28, 2009 4:31 pm
Posts: 273
Location: Metairie, La & Navarre, FL
Yep haven't made any of the other Eglin rides! Can get a pass on sat morning. Everyone else this could be last ride with pass before you need new one price went up to $12.

_________________
1997 TJ, 4 banger, banks monster,
6" skyjacker rr long arm with nitro shocks,
33" bfg at's on mt classic locks,
d44 front & back with 4.88's and detroits
" Who needs a trail, just make your own!"
Member:Tread Heavily, Eglin Hard Hitters


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 8:41 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
sat 5th is fine.

time?

mileage is CRAP on the crd. so maybe we can figure that out.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 8:44 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
if anyone wants to come "look" at the crd before then, so i know what to order to fix it... im all ears...

btw. i have a 20" by 48" pit..... if ya'll want ill be happy to smoke a brisket and do some homeade burgers....

i generally bbq and work in the shop every single sunday.

other than that, i dont really have much to do.

i dont have any crd specific tools, but i do have a lathe, a mill, and can weld aluminum, stainless, mild steel and have air tools, torque wrenches and a 16,000lb 2 post lift and tire machine (no balancer though)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 8:52 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
linewarbr wrote:
Actually, I'm thinking. . .

Bub/ Mcinfantry, have either of you installed your own lift? Shag, I know you had yours done - Light Line, right?

I'm wondering about the relative merit of installing the Frankenlift and leaving the trans work for another time - after it's easier to get under the Jeep, maybe? :o


i have not modded the liberty. but i have installed/built lifts on other things.... we can do it.. im sure.

if anyone NEEDS to, you can have parts shipped here. i have a forklift.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 3:59 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
I would never turn down smoked brisket. . .

Have you tried pulling your MAP sensor to see if it is gummed up?

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 4:05 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
I have done nothing, maybe before next week you can swing by? That way I can order what I need


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 8:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
I don't think I can pass on smoked brisket.I'm in.
Hey Mac,Reliable Filter has the cheapest Provents around,I could pick up a willcall,if you looking to provent.Same for LW.
Cleaning the MAP sensor costs nothing and will DEFINATELY help if never cleaned :shock: .
Samco's are cool,a bit pricey,but takes 5 min to install.
Fuel filter takes five min.
Belt swap is fun,but not bad.
Did two SEGR's

I'll probably have my chainsaws 20"Stihl and Stihl ext. polesaw with me if you need some chopping or pruining.

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 28, 2009 11:59 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
Ya'll wanna meet, say, 9:00 am? Or is that to early to start drinking beer . . . I mean, working? Bub, you've got the farthest to go, so let us know what works for you.

Mack, I'm going to be tied up all weekend. My wife's 10-year high school reunion is this weekend (Lame :? I hated high school) and I committed to doing that with her. How bout we do this. . .

What are some mods you may be interested in? I'm running an Elephant Hose Mod, venting my crankcase straight to the atmosphere. Keeps the oil out of my intercooler and hoses, but not the prettiest setup. I have kitty litter on my garage floor to catch the drip. Bub is running a Provent, which is better for the environment and prevents an oil slick ($150 where you get it, right Bub?) and is a relatively easy install - it only requires that you mount the filter assembly itself somewhere under the hood. Either one of these will keep the oil in your intake to a minimum.

What would you be looking to accomplish in modding? Longevity? Fuel economy? Better performance? More ground clearance? A solid front axle? The world is your oyster, tell us what you want to do.

If you want to do a fuel filter, I'll be glad to pick one up for you. Shags needs to change his fuel filter, I think. I hope he can make it.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 30, 2009 10:04 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
Anytime is good for me,I'm an early bird.
I'll bring chirizo stuffed jalapenos wrapped with thick cut bacon.
Hey Mac,what else should I bring?Yea I know to bring beer. :roll:

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 12:15 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
im REALLY interested in just making it more reliable, better mileage.

GDE mod is #1.... i may order that this week.. im game for a fuel filter...

i can show you how to EASILY sharpen a chainsaw on the bar..... but i am a husky man...what stihls? i run a 346 (16") and 372 (20")

no real beer drinker. ill make a 10~12lb brisket.... ill have it ready around 1 to 2, if thats ok...


mostly ill look at y'alls stuff

im NOT a big beer drinker, but i am trying to get a guiness kegerator going...

too many projects, not enough time....

i get up around 7ish... but 9am is cool... no earlier....


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 9:20 am 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
ok, ordered GDE.

besides THAT, what else "needs" to be done?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 1:00 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
I'd say an EHM or a Provent. If the wife mostly drives it, then keep in mind that you will get some "territory marking" from the EHM, as oil will drip out of it. This does not happen with the Provent.

You already pulled your ECU and sent it off to GDE?

I would plan on pulling the intercooler hoses and inspecting and possibly cleaning them.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 1:09 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
I'm doing the exchange. They send me one, I send mine back. Where do I get the provent?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 5:28 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
That's cool, they didn't offer that when I did mine. Jeep was down from Saturday to Wednesday, since I didn't get it in the mail till Monday morning. I think you will definitely like the tune. :twisted:

Bub knows a place in LaPlace that sells the Mann-Hummel Provent for $150; I think he offered to pick one up for you if you want. I know he installed one in his and in another CRD'ers truck, so he knows what he's doing.

Something you may want to do is check your intercooler hoses beforehand. If you run your hand along them and they are sweating oil then they are a liability. If you feel like putting out $300+, a set of Samco hoses is the way to go. I ordered mine from Boostcontroller.com and got them in 3 days.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 5:30 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
Ok, pick me up a provent, I'll pay you on sat, if that is ok


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 5:35 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
Mac I've got the Stihl MS360(relief valve is NICE) and the Pro ext.Pruiner.I'd like to learn shapening technique.

You can order the Provent from this place(cheapest around),and I can pick it up Will-Call.They're right around the corner from my shop.Picked up the Shagsters for him.
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=43828
If you want,I could buy all that is involved(minus the 1' of 1"hardwall)around 50 bucks worth of goods(if ya want the goodstuff)
or I can give you a list of goods needed.If you want to install that day,and you have a marina near you(thinking mabe not),and can score a foot of 1" hard OR softwall hose,we can do it.
Mac,you're NOT a beer drinker,is wine your thing(cause I've got a good bottle hang'n round),or you take the herbal approach?
:shock: 8) :lol:

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 5:39 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
Lol, I'll take a bottle, red is best....
Pick me up whatever and I can pay you back (but I need to order the provent and willcall, right?)

I work 7 days a week.... No time For some things....


Top
 Profile  
 
 Post subject: Linewarbr's planned work
PostPosted: Mon Aug 31, 2009 7:49 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
I want to:

Pull my MAP sensor and check to see if it needs cleaning.

Do a four-tire rotation. (while I have access to a two-post lift - thx Mack)

Change transmission fluid/ filters. Still considering the Transgo shift kit, just not sure if I want to tackle that install. I want to send off a sample of my trans fluid to Blackstone for analysis.

Bub, do you have pics available of your Provent install? I might be interested in doing that. I don't have a snorkel (yet. . . 8) ) so I may not have the same kind of real estate under the hood as you.

Mack, do you have enough waste oil pans for a trans drain? Specs say it holds 14 quarts though I doubt we'll get that much out of it.

As for tools, I'm planning on bringing my basic ratchet set.

As for refreshments, I have a bottle of Port from a small winery in Missouri that I have yet to open. Does anyone like Port?

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 8:10 pm 
Offline
LOST Newbie

Joined: Sat May 23, 2009 4:42 pm
Posts: 68
Location: Denham Springs, La
You won't need hand tools. I have a 55 gallon waste oil drum


Top
 Profile  
 
 Post subject: Edited With Pics
PostPosted: Mon Aug 31, 2009 8:24 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 12, 2008 5:32 pm
Posts: 1776
Location: Metairie,Mt.Hermon La.
Mac,you can call them tomorrow and I can pick it up.Same for LW.
Snorkel doesn't help. :lol: The Provent sits right between the batt and master cylinder.
I'll PM you guys my number and go take a pic.
Image
Image
Image
Image
Sorry my engine hasn't been cleaned since before the last Eglin run.

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com