| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 245/70/16 General Grabbers on Moabs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=15678 |
Page 1 of 1 |
| Author: | njjeepthing [ Sun Dec 17, 2006 9:59 am ] |
| Post subject: | 245/70/16 General Grabbers on Moabs |
I'm getting ready to purchase some General Grabbers in 245/70r16's to mount on my Rubicon rims. Just wanted to make sure, and I did search, that there are no real issues with this combo. From the search all I got was maybe a little rub.... It's an 03 stock KJ. |
|
| Author: | KJ04 [ Sun Dec 17, 2006 10:03 am ] |
| Post subject: | |
Pinchweld might need pounded over if ur gonna be flexin it, otherwise should be fine for street ride only. |
|
| Author: | njjeepthing [ Sun Dec 17, 2006 10:22 am ] |
| Post subject: | |
KJ04 wrote: Pinchweld might need pounded over if ur gonna be flexin it, otherwise should be fine for street ride only.
Thanks, it's for street only, so looking good! |
|
| Author: | CTjeeper16 [ Sun Dec 17, 2006 11:32 am ] |
| Post subject: | |
I've got the grabbers in 245/70 on the stock rims of my '03 ( no lift....yet) . I have very very minor (stress the minor) rubbing on in the front near the fog light door and only at full lock, nothing on the pinch weld. but the backspacing of the rubi's may change this. great tire though. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|