Is it possible to run a 31 1050 17 under a liberty with a 3.5 inch lift on Moab rims I am wondering because I am thinking about trying. Just wondering if anyone had already. I have already beat the pinch weld down and done a little fender trimming in the front.

Well 31x10.50x17's will not fit on MOAB rims(they are 16" rims),the newer JK's have 17" MOAB rims but are 5 on 5 bolt pattern and will not fit on a KJ(4.5 on 5 bolt pattern).31x10.50's will fit under a liberty but are more common for 15" rims(and very few steel 15" fit on a KJ),and are very rare for 16" rims(closest metric size is 265/75R16's which=31.5"-31.9" depending on manufacturer).

Thanks I appreciate the incite. I am in the process of possibly selling off my 285 60 18 and going with something friendlier to my fenderwells. I am going to try one mor thing to help stuff all that rubber into the rear fenderwell then I may give up and sell them rims and all. I have had no problems with the front it has been the rear fenders that have xaused the issue. IT does fine on the hyway but if you go thru a off cambor it feeds right into the fender. Oh well I will keep tinkering. I should be able to post some pics very soon again thanks for the help. I LOVE THIS WEBSITE