LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Stock Steel Wheels
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=42944		 Page 1 of 1
Author:  JMSMN [ Wed May 06, 2009 9:58 pm ]
Post subject:  Stock Steel Wheels
I have the stock steel wheels on my o6', I want to run 245/75R16 MT's. Will I have to run the spidertrax 1 1/2" spacers to prevent alot of rubbing, or will I bo ok with just the wheels. I will be putting on a lift of atleast 2 1/2 inches. Any help would be appreciated.
Author:  Guest [ Wed May 06, 2009 10:25 pm ]
Post subject: 
Nope. ThunderbirdJunkie has been doing just that for forty thousand miles.
Author:  InCommando [ Thu May 07, 2009 4:25 am ]
Post subject: 
In my experience, running the stock wheels will give you the most clearance and least rubbing.
Author:  Fouros [ Thu May 07, 2009 6:09 am ]
Post subject: 
as long as your lifted with that size tyre
Author:  LibertyFever [ Thu May 07, 2009 7:42 am ]
Post subject: 
I'm running a 2.5" spacer or OTT lift on my Liberty Sport and I don't seem to have any rubbing with my 245/75R16 tires but that's stickly highway driving. If I go offroad I am expecting some rubbing and some trimming to be required.

Likely spacers on stock rims will only prevent you from rubbing on the inner fenders but then you'll be rubbing on the outer fender wheel wells.
Here's a pic of my ride;
Image

The next time I change my rims/tires I'll try a set of 1.5" spacers I have laying about and take some pics.
Author:  JMSMN [ Thu May 07, 2009 6:39 pm ]
Post subject: 
Thanks for all the replies.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/