Ya, Retreads! Just got two of these in the 265/75-16 size. $216 for both, delivered to my door. I'm going to order 2 more next payday. I will put the first 2 on the rear and then when the others come in I'll finish the front. Going to put them on the stock KJ steelies after powder coating them black.
I'll have the reviews up for first impressions and then as winter arrives in NW Ohio I'll update with snow and mud reviews. They look BADAZZ, hope they perform as well as they look. I got the ones with the extra "kedge grip".
from their website:
Kedge Grip: Our own unique blend of crushed (recycled) glass and crushed walnut shell particle blended into our full grade truck rubber. Kedge Grip acts in a twofold way; first the walnut shell is designed to come out leaving small (approximately 1 mm) size pits in the tread surface that will act as additional siping and create more traction edges to grip the road. The second is the crushed glass which is designed to stay in longer and create a gritty surface to help anchor you to the road. Does it really work? Don’t take our word for it, read some of the testimonials. Also, check out the 4Wheeler magazine (though under a different name that we are not allowed to use any longer due to trademark issues) in the August 2009 issue. They consistently had excellent results with our Kedge Grip.
Edit: ended up with 285/75-16 with these measurements
Tread Depth: 19/32”
Meas. Rim Width: 8”
Tread Width: 9.1”
Rim Width Range: 7.5-9”
Max Load: 3,305 lbs
Outer Diameter: 33.2”
Max PSI: 65 psi
Section Width: 11.4”
I'm almost scared to hit the pedal, I know if I have too much wheel spin I'm going to grenade my diff.
Have 2 rims painted, need to get the other 2 sandblasted e-coated and painted and then I can put 'em on and see how badly they rub 
