Been running them since May last year,about 25000m,Treadwright shipped quick,tires balanced well,if I don't go to Swampers will buy again.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Treadwright Crawler MT http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=52259 |
Page 1 of 1 |
| Author: | Quicksilversurf917 [ Tue Apr 27, 2010 10:56 pm ] |
| Post subject: | Treadwright Crawler MT |
Does anyone on here have any expereince with these tires? Or know of anyone with these? they look interesting and I want to try something new. https://www.treadwright.com/shopnow/pro ... -mt-e.aspx |
|
| Author: | jay21 [ Wed Apr 28, 2010 12:38 am ] |
| Post subject: | Re: Treadwright Crawler MT |
I have their MTG (ripoff Wrangler MT/R) and love them! well worth the money. |
|
| Author: | JeepinJarhead03 [ Wed Apr 28, 2010 12:55 am ] |
| Post subject: | Re: Treadwright Crawler MT |
pretty similar tread design to what i'm running, will prob be a louder tire, little less on the wet decel traction, but controllable, offroad.. not a single complaint |
|
| Author: | ridenby [ Wed Apr 28, 2010 6:13 am ] |
| Post subject: | Re: Treadwright Crawler MT |
Been running them since May last year,about 25000m,Treadwright shipped quick,tires balanced well,if I don't go to Swampers will buy again. |
|
| Author: | Quicksilversurf917 [ Wed Apr 28, 2010 10:39 am ] |
| Post subject: | Re: Treadwright Crawler MT |
jay21 wrote: I have their MTG (ripoff Wrangler MT/R) and love them! well worth the money. I was looking into getting them but im still just looking around JeepinJarhead03 wrote: pretty similar tread design to what i'm running, will prob be a louder tire, little less on the wet decel traction, but controllable, offroad.. not a single complaint What kind of tires are you running? |
|
| Author: | JeepinJarhead03 [ Wed Apr 28, 2010 4:16 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
im running mastercraft courser m/t's  the tread design is very similar, the center blocks on the treadwrights are shaped different but they're similar enough that I feel comfortable saying that they'ed behave quite similarly tread wise, alot of it will depend on what casings are used for the TW's when it comes to manners if you don't mind some noise i wouldn't think twice on that tread design, especially if you put it in the swamp pudding pretty often, took my coursers out to catfish lake and tried to get it stuck and i failed, backed off a root ledge into the marsh goop held the brake to lock the front tires (no abs) gave it gas and the dang things pushed my front tires like paddles from 10 to 35 its a low growl, 40 to 55 its a RAWRM RAWRM RAWRM 55 to 65 its one of those high pitched tire sings, but 65+ they kinda shut up, or it goes beyond my range of hearing, the noise is still there but i just notice it i'd imagine after about 10-15k the TW's would be quite similar, ,but it's nothing the radio at a moderate volume won't cover up just make sure they put them on good strong casings |
|
| Author: | ridenby [ Wed Apr 28, 2010 4:50 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
They used Goodyear Wrangler MT/R with dura-wall casing for mine,all 6 match. Load range E,run 40 or so on road,they seem to like 15r-20f off,and yes they have the Redneck Mating Call going on. |
|
| Author: | LibertyCRD [ Wed Apr 28, 2010 9:21 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
I have run multiple sets of TreadWrights in various treads and casings...and I have never seen a single issue with them whatsoever. They are great tires for the money and the only reason I'm not running them right now is because they don't offer the style I want in 255/70. |
|
| Author: | Quicksilversurf917 [ Wed Apr 28, 2010 9:40 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
Also with them being load range "E" will they wear faster or slower than "C" rated tires? I do alot of traveling and I just want these to last |
|
| Author: | JeepinJarhead03 [ Thu Apr 29, 2010 3:14 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
yeah i wish i could find some good ones in 255-70 too E's will wear your brakes faster, being retreads the compound is going to be softer so they'ed wear faster than a non-retread, that tread design is known for hit and miss wear, some will wear great, some won't keep them rotated and aligned and they should last you 30-40k fairly easily |
|
| Author: | JMSMN [ Thu Apr 29, 2010 8:26 pm ] |
| Post subject: | Re: Treadwright Crawler MT |
I have the MTR design and love them, wear great and tons of traction. But, rotate. If the tires dont have enough traction for your conditions, you can always get them siped. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|