| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Metric Wheel size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=52351 |
Page 1 of 1 |
| Author: | SavageUrge [ Sat May 01, 2010 1:45 am ] |
| Post subject: | Metric Wheel size |
Would 16x8 or 16x10 be closest to stock? |
|
| Author: | DirtyKK [ Sat May 01, 2010 2:20 am ] |
| Post subject: | Re: Metric Wheel size |
16x8 |
|
| Author: | tommudd [ Sat May 01, 2010 10:00 am ] |
| Post subject: | Re: Metric Wheel size |
stock are 16 X7 are you lifting it ? |
|
| Author: | SavageUrge [ Sat May 01, 2010 11:19 am ] |
| Post subject: | Re: Metric Wheel size |
Actually no. I decided to stick with the stock height since I never go off-road and putting a Franky on would cost 4 times as much as just replacing all the suspension. I got a brand new Sensa-Trac suspension with Moog springs all around for under $350 after rebates @ Rock Auto. It's guaranteed for life, so even if I go another 100,000 I won't have to worry about spending money on the suspension again. Thank you very much for all your input on the subject. |
|
| Author: | tommudd [ Sat May 01, 2010 12:44 pm ] |
| Post subject: | Re: Metric Wheel size |
stock height, then I would stick with a 7 inch wide wheel, any wider depending on back spacing would or could cause problems |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|