| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Thinking about these wheels... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=53050 |
Page 1 of 1 |
| Author: | dieselsmoke [ Mon May 24, 2010 8:12 pm ] |
| Post subject: | Thinking about these wheels... |
so iv got a stock lift for now. if i do a lift im not going big at all. my question is..... will these wheels fit with this back space? they are 15x8 what size tire would i be able to run with these wheels without scrub'n? http://www.jegs.com/webapp/wcs/stores/s ... howValue=1 |
|
| Author: | JeepinJarhead03 [ Mon May 24, 2010 9:22 pm ] |
| Post subject: | Re: Thinking about these wheels... |
stock bs is 5.5" 3.something is going to be rough, plus if they're alloy they aren't going to clear the calipers since they're 15" rims peruse the tires section, there's a ton of discussion on 15" rims if that's the route you'd like to go, generally try to keep it between 4" and 5.5" bs |
|
| Author: | dieselsmoke [ Mon May 24, 2010 9:57 pm ] |
| Post subject: | Re: Thinking about these wheels... |
JeepinJarhead03 wrote: stock bs is 5.5" 3.something is going to be rough, plus if they're alloy they aren't going to clear the calipers since they're 15" rims peruse the tires section, there's a ton of discussion on 15" rims if that's the route you'd like to go, generally try to keep it between 4" and 5.5" bs thanks |
|
| Author: | RED_KJ_666 [ Tue May 25, 2010 8:47 pm ] |
| Post subject: | Re: Thinking about these wheels... |
I have a stock XJ steelie 15" 5.5" of BS and it hits the tie rod ends so I think the least I'd shoot for is 5" of BS |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|