Go to the 4x4 section and look at the "POST YOUR 4X4 MODS HERE"
lost of pictures and what they have as far as lifts, wheels etc
save everyone some time maybe
just a thought
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need some picks http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=58086 |
Page 1 of 1 |
| Author: | jamese35 [ Sat Jan 08, 2011 11:33 pm ] |
| Post subject: | need some picks |
He all I'm looking for some picks of kj's with 245/75 or 31/11.16 super swamper tires. Could you pleas list the hight of lift and off set on your rims. All picks will be greatly appreciated. Thanks Jim |
|
| Author: | tommudd [ Sun Jan 09, 2011 12:12 am ] |
| Post subject: | Re: need some picks |
Go to the 4x4 section and look at the "POST YOUR 4X4 MODS HERE" lost of pictures and what they have as far as lifts, wheels etc save everyone some time maybe just a thought
|
|
| Author: | HoosierJeeper [ Sun Jan 09, 2011 10:48 am ] |
| Post subject: | Re: need some picks |
I thought you meant guitar picks going by the spelling...was going to say Fender Mediums. 
|
|
| Author: | jamese35 [ Sun Jan 09, 2011 12:04 pm ] |
| Post subject: | Re: need some picks |
sorry computer changed it on me. |
|
| Author: | Jackson02 [ Sun Jan 09, 2011 2:36 pm ] |
| Post subject: | Re: need some picks |
 2.5" daystar lift swamper Irok nds in 245/75/16 (no longer producing that size) |
|
| Author: | jamese35 [ Sun Jan 09, 2011 8:46 pm ] |
| Post subject: | Re: need some picks |
any rubbing on them |
|
| Author: | Jackson02 [ Sun Jan 09, 2011 10:14 pm ] |
| Post subject: | Re: need some picks |
yes at full turn they grabbed at the inner plastic near the lower a arm behind the wheel and made a nasty noise. |
|
| Author: | jamese35 [ Sun Jan 09, 2011 11:24 pm ] |
| Post subject: | Re: need some picks |
did you cut the fender wells out and if so do you have any pics of it? |
|
| Author: | Jackson02 [ Mon Jan 10, 2011 1:13 am ] |
| Post subject: | Re: need some picks |
where it was rubbing there was nothing you could do other than wheel spacers or new wheels. |
|
| Author: | jamese35 [ Mon Jan 10, 2011 11:43 am ] |
| Post subject: | Re: need some picks |
O ok how much offset did you have? |
|
| Author: | Jackson02 [ Mon Jan 10, 2011 12:32 pm ] |
| Post subject: | Re: need some picks |
idk they were stock wheels |
|
| Author: | jamese35 [ Tue Jan 11, 2011 2:02 am ] |
| Post subject: | Re: need some picks |
what back do you have now? |
|
| Author: | Jackson02 [ Tue Jan 11, 2011 11:35 am ] |
| Post subject: | Re: need some picks |
15x7 soft 8 with 4.25 backspace with 31x10.50 15 Goodyear Duratracs |
|
| Author: | jamese35 [ Tue Jan 11, 2011 12:19 pm ] |
| Post subject: | Re: need some picks |
Do they stick out past the fenders and if so how far? Thanks for answering all my questions I know I have alot of them I'm not new to building trucks up but it will be my first IFS build and a first for building any kinda jeep so all the help is great. Thanks Jim |
|
| Author: | Jackson02 [ Wed Jan 12, 2011 2:37 am ] |
| Post subject: | Re: need some picks |
No thankfully they dont, cause that is illegal here. It is really close though. |
|
| Author: | jamese35 [ Wed Jan 12, 2011 3:43 pm ] |
| Post subject: | Re: need some picks |
I'm aloud one inch but I have it like that on my truck and the rock chips suck and I'm just not that big of a fan of it I like flush. or if the lugs stick out just a bit thats ok. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|