| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Are the Cragar V5 wheels better than soft8's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=59047 |
Page 1 of 1 |
| Author: | JBHARDWARE [ Mon Feb 21, 2011 5:09 am ] |
| Post subject: | Are the Cragar V5 wheels better than soft8's |
The Cragar Soft 8's are 16x7 5 0n 4.5 with 4" Backspacing, the Cragar V5 is 16x7 5on4.5 with 4.5" Back spacing, so woulnd't these be a better fit for the Libby? Thoughts? Advice? Anyone running the V5? ![]() FIND THE HERE http://www.quadratec.com/products/92602_4XX_B_PG.htm |
|
| Author: | tommudd [ Mon Feb 21, 2011 11:24 am ] |
| Post subject: | Re: Are the Cragar V5 wheels better than soft8's |
depends on lifted or not, what size tires, type of tread, and a few more things. But in "most cases" if lifted then yes |
|
| Author: | JBHARDWARE [ Mon Feb 21, 2011 12:37 pm ] |
| Post subject: | Re: Are the Cragar V5 wheels better than soft8's |
In a typical set up, 2.5" lift-245/75/16 Federal Courigia. I was thinking that the 4.5" backspacing would be better than the 4" Backspacing dur to the factory BS being 5.5" |
|
| Author: | tommudd [ Mon Feb 21, 2011 2:41 pm ] |
| Post subject: | Re: Are the Cragar V5 wheels better than soft8's |
Most all use the 16 X 7 with 4 inch backspacing as you know, minimal rub on the sway bar etc with that size and back spacing really the difference is not that much but I would think thats where your problem will be ( rubbing on the sway bar when fully turned ) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|