It is currently Wed Jan 14, 2026 10:24 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Would it hold the new spare
PostPosted: Wed Jun 29, 2011 8:14 pm 
Offline
LOST Newbie

Joined: Mon Jan 02, 2006 8:36 pm
Posts: 49
Location: Saginaw, Tx
I bought 4 245-75 tires on a procomp 7032 16x8 wheels (had to get a 2' spacer lift to prevent rubbing) but I wanted to buy the same for my spare. Will the bigger tire/wheel fit the spare mount or do need to relocate it? or just stay with the stock wheel and old spare?

_________________
Dave T. 1995 XJ, 2003 KJ with a 2" daystar lift with an K-N filter with procomp 7032 black wheels with Yoko's on them, Maga-flow exhaust, Hid headlights and HID foglights and Led lights mounted on a bracket near the tank for backing up and led lamps elsewhere also an ARB in the rear and a detroit truetrac in frt.


Top
 Profile  
 
 Post subject: Re: Would it hold the new spare
PostPosted: Wed Jun 29, 2011 8:43 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Should fit with no problems I have had 16X8 inch Moabs with 245-75s hanging on mine for quite a while

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Would it hold the new spare
PostPosted: Wed Jun 29, 2011 10:45 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1118
Location: DFW, TX
I have 16x8 Moab with 265/75-16 HEAVY Load D Treadwright Guard Dog on mine. No problems. The spare mount is surprisingly strong. Lots of bracing inside that rear gate.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject: Re: Would it hold the new spare
PostPosted: Thu Jun 30, 2011 1:16 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Nov 20, 2010 12:26 pm
Posts: 271
Location: Palm Desert, CA
I have 8069 Procomps 16 x 8 with 4" back spacing and 245x75x16 MTR's and mine fits so I am sure yours would also. And it won't look cheezy with the stock spare. :)

_________________
2004 KJ Limited
Eaton "e" locker front
Detroit Locker rear
Frankenlift II
245 75 16 Goodyear MTR's
Moabs
Al's UCA's
Boulderbars
Backbone with Warn XD9000i, Viking synthetic line
Rubicon Big Brother


Top
 Profile  
 
 Post subject: Re: Would it hold the new spare
PostPosted: Thu Jun 30, 2011 7:51 pm 
Offline
LOST Newbie

Joined: Mon Jan 02, 2006 8:36 pm
Posts: 49
Location: Saginaw, Tx
thanks for the info, got them order but since the wheel is backordered will have to wait a spell. But it would look better and perform safer if needed.

_________________
Dave T. 1995 XJ, 2003 KJ with a 2" daystar lift with an K-N filter with procomp 7032 black wheels with Yoko's on them, Maga-flow exhaust, Hid headlights and HID foglights and Led lights mounted on a bracket near the tank for backing up and led lamps elsewhere also an ARB in the rear and a detroit truetrac in frt.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com