| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rim question... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=61193 |
Page 1 of 1 |
| Author: | acweller [ Mon Jun 13, 2011 11:18 pm ] |
| Post subject: | rim question... |
hey ya'll, got a question bout the offset of this wheel. I know the bolt pattern is incorrect, but that can be fixed with spacers. here is a link, I know one of you know it all's has to know it. http://cgi.ebay.com/ebaymotors/16-X-7-J ... ccessories Thanks, Aaron |
|
| Author: | tommudd [ Tue Jun 14, 2011 12:02 am ] |
| Post subject: | Re: rim question... |
First I have to ask why you want these wheels? After buying them and then adapters you'll have more then if you just found a set of stock KJ wheels that has the right bolt pattern. But as far as back spacing more than likely around 5 inches |
|
| Author: | acweller [ Tue Jun 14, 2011 9:56 am ] |
| Post subject: | Re: rim question... |
tommudd wrote: First I have to ask why you want these wheels? After buying them and then adapters you'll have more then if you just found a set of stock KJ wheels that has the right bolt pattern. But as far as back spacing more than likely around 5 inches I like them because they are inexpensive and I like the simple 5 spoke design. There really aren't any wheels out there that excite me aside from the Moabs and I kinda like the 08-10 Libby wheels. I'm interested in the gunmetal/machine 08 libby wheels for my 06. There are a few other wheels out there that i like but im just not sure on fitment with the life I want. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|