| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lifting 03 What do you think of these wheels? would you use? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=61317 |
Page 1 of 1 |
| Author: | 1 BAD BIRD [ Tue Jun 21, 2011 1:07 pm ] |
| Post subject: | Lifting 03 What do you think of these wheels? would you use? |
Hello, I bought my 03 KJ used about two weeks ago. I was wondering if anyone knows the specs on these wheels?   Thank you in advance for any help!!! Thanks to everyone that helped me find out the specs on these. Now my question is would you use these? I like the idea that not many have them, and could use the extra $$$$ for something else like A arms? Just looking for some thoughts. Thanks in advance. |
|
| Author: | irollgen4s [ Tue Jun 21, 2011 2:11 pm ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
finally! someone that shares the same wheels as me. I have the same exact ones, but i know NOTHING about them. Im taking them off soon anyway though to replace with cragars and keeping these with more highway friendly tires. |
|
| Author: | 1 BAD BIRD [ Tue Jun 21, 2011 3:43 pm ] |
| Post subject: | Anyone know these wheels? Specs? |
I have been tryin to find out info on these. I believe them to be a mopar accesery. I only have 4 and was looking for one for the spare. Do u have a pic of your jeep? |
|
| Author: | tjkj2002 [ Tue Jun 21, 2011 3:48 pm ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
Those are optional Jeep wheels,time for a trip to the dealership. |
|
| Author: | 1 BAD BIRD [ Tue Jun 21, 2011 4:30 pm ] |
| Post subject: | Anyone know these wheels? Specs? |
Do u know there width? |
|
| Author: | tommudd [ Tue Jun 21, 2011 4:43 pm ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
same as all stock KJ wheels 7 inches |
|
| Author: | irollgen4s [ Tue Jun 21, 2011 4:55 pm ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
 thats mine. Theyre 16x7's with terrible backspacing(too close in). had to get spacers to bring them out in order to keep them off the sway bar. Mine are in pretty rough shape, just one of the reasons im replacing them. Theyre rotted on the inside where they sit against the hub from all the miles and from the road salt when my dad drove it. |
|
| Author: | gtommec [ Tue Jun 21, 2011 9:28 pm ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
Those are the Mopar Genuine Accessories 16x7 wheels and were available in both polished alumium and chrome. They were available as a stand-alone accessory or as part of the Chrome Accent Package They have the same backspacing as all other stock KJ wheels. I have them on my 2002 2WD Sport: 
|
|
| Author: | 1 BAD BIRD [ Thu Jun 23, 2011 10:51 am ] |
| Post subject: | Anyone know these wheels? Specs? |
Irollgen4s? Do u have a side shot of that beast? What lift you have? |
|
| Author: | irollgen4s [ Thu Jun 23, 2011 11:07 am ] |
| Post subject: | Re: Anyone know these wheels? Specs? |
this is the best i have, i actually have no clean non action sideshots hahaha  In those pictures it was a brand new frankenlift, was at around 22inches. Went to rauch creek and it settled a bit and then i added an iso in the rear, and a spacer plate in front and brought it to just under 22 inches. I have a clevis lift and another rear iso planned in the future if it drops more. I also have many more things on order right now for the libby, will have pictures somewhere on the forum when its done. |
|
| Author: | 1 BAD BIRD [ Sat Jul 16, 2011 4:27 pm ] |
| Post subject: | Re: Lifting 03 What do you think of these wheels? would you |
Not sure if I wanna keep these rims or not after my lift. Anyone have any ideas what other wheels would look "mean". Not sure how I feel with bling on a Jeep? thanks for any suggestions. Bob s. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|