LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Will 30/9.50 fit stock
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=61859
Page 1 of 1

Author:  vincennescrd [ Wed Jul 27, 2011 1:50 pm ]
Post subject:  Will 30/9.50 fit stock

I can get a set of 30/9.50. Question is will they fit on my stock Crd. Springs have sagged about an inch. Thanks for help

Author:  tommudd [ Wed Jul 27, 2011 2:38 pm ]
Post subject:  Re: Will 30/9.50 fit stock

30X9.50X15?
If so will be hard to find a wheel that will fit with the correct backspacing etc and then with it already having sagged suspension
Would be a tight fit

Author:  ramlebliberty [ Mon Aug 01, 2011 10:30 pm ]
Post subject:  Re: Will 30/9.50 fit stock

install wheel, buy sawsall/grinder/jigsaw, cut to fit, drive ;) anything will fit with the proper amount of motivation and cutting!

Author:  JeepinJarhead03 [ Tue Aug 02, 2011 1:57 am ]
Post subject:  Re: Will 30/9.50 fit stock

fit yes
rub.. yes

drivable yes

look like a pregnant roller skate yes :P


30/9.5 is basically a 255 70 16 profile tire which i had on mine for about 10k before lifting and it was sagged about as sagged as they get - as long as it's like a michelin ltx ms style tread it should be fine other than the rubbing - mostly pound the pinch push the fog light doors forward some - that size tire with true M/T style tread and you'll rip the fenderliners out with the sidelugs more than likely

Author:  ramlebliberty [ Tue Aug 02, 2011 8:20 am ]
Post subject:  Re: Will 30/9.50 fit stock

who needs fender liners anyways?

Author:  JeepinJarhead03 [ Tue Aug 02, 2011 8:38 pm ]
Post subject:  Re: Will 30/9.50 fit stock

fenderliners are like condoms.. good to keep on unless you want stuff growin on your EFI

and stuff :P

Author:  ramlebliberty [ Tue Aug 02, 2011 10:33 pm ]
Post subject:  Re: Will 30/9.50 fit stock

2 year with no liners and my Jeep has no STD's (SAND TRAVERSING DEPOSITS) :wink:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/