| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 31s and 15x10 wheels http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=65057 |
Page 1 of 1 |
| Author: | vincennescrd [ Sun Feb 05, 2012 2:35 pm ] |
| Post subject: | 31s and 15x10 wheels |
Figured I would update on my Libby with ome springs and jba top plate. I have been running my lift with 31 wrangler authorities on 15x10 wheels for about 6000 miles and happy to report I still have absolutely no rubbing. Mine is a crd in case your curious. 
|
|
| Author: | bshooter [ Tue May 08, 2012 7:28 pm ] |
| Post subject: | Re: 31s and 15x10 wheels |
I new this could be done!!! 
|
|
| Author: | vincennescrd [ Wed May 09, 2012 1:21 am ] |
| Post subject: | Re: 31s and 15x10 wheels |
It can be done and I have no rubbing up front with bumper mod. Rubs on rear flares at bump stop. I wheel it hard to and no problems yet. |
|
| Author: | Ryn7 [ Wed May 09, 2012 5:48 am ] |
| Post subject: | Re: 31s and 15x10 wheels |
Lets see photo's of your KJ being "wheeled hard" |
|
| Author: | vincennescrd [ Wed May 09, 2012 10:35 am ] |
| Post subject: | Re: 31s and 15x10 wheels |
I'll try to dig up what I have later |
|
| Author: | heyadamhey [ Thu May 10, 2012 3:53 pm ] |
| Post subject: | Re: 31s and 15x10 wheels |
That looks bad @$$! what's the backspacing on those rims? No rubbing on the pinch welds even? |
|
| Author: | vincennescrd [ Fri May 11, 2012 2:00 am ] |
| Post subject: | Re: 31s and 15x10 wheels |
3.75 backspacing. Inner fenders and pinch welds beat flat. No rub on front anywhere. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|