Hi,

I am looking to buy a set of ProComp 16x7 Back space 4 and then fit them with 235/85R16 (or 245/75R16 maybe 265/70R16). As I am in the UK, I have to order them specially, so I want to know if these will fit correctly for the tyres I want to fit giving me enough backspace clearance. I know a lot of you run them on you KJ. Also I would help to see how much the Wheels come out of the arch, photos much appreaciated. I have been running Spacers 1.25 with standard Alloys 5.5 back space and I can live with it, but rather have a better set up.
These are the two models I am considering PCW52-6766 or PCW98-6765 on the ProComp website:http://www.procompusa.com/tools/filters/wheel-finder.aspx?bp=5+on+4.5&df=16.00&dt=16.00&finish=Black&ptID=100021&pg=1

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Fil
The maroon one has 16X7 / 4 inches of backspacing and 245-75-16 tires on it
That will give you some idea as to how they look
hope that helps some



Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Hi Tom

thank you, I think that is about right and doesn't come out as much as with spacers on (can't quite see as the KJ isn't straight), i think 1/4 inc less.
I suppose fitting 235/85R16 should be fine to and shouldn't be getting to much rubbing against the sway bar. I suppose with my lift I will still need to pound the Pinch weld..

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

another shot of his a couple of years ago
may show better
for some reason he can't park with the wheels pointed straight ahead

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I have 235/85s and there will be some rubbing. I have also trimmed the bottom of my bumper.

_________________
'05 Renny 6 speed
OME/Bilsteins, Spidertrax Wheel Spacers, Husky Liners all around, Gutter Guarded Grill, 1 ISO each side rear, Boilers top shims front. And a whole list of things yet to do.

Tom / Megalos,

thank you for the feedback, now it's a question of finding how has them over here in the UK or how long it will take to get them over from the US. Shame they don't come painted in gray... guess you can't have it all.

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators