LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

-12mm backspacing too much?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=74551
Page 1 of 1

Author:  Imp [ Sun Mar 17, 2013 10:48 pm ]
Post subject:  -12mm backspacing too much?

My friend has a set of m/t classic locks he is looking to get rid of. They are a 16x8 5x4.5 with -12mm backspacing. Curently I have stock rims with 245/65r16, and I'm curious to know if that is too much backspacing for my KK. I've seen 0mm offset rims on them and they sit just outside the fender. Are these m/t going to cause too much issue or does anyone run something along those lines that has a pic?. I would just throw them on to test fit but he has 305's on them so I can't fit under my KK to see.

Author:  tommudd [ Mon Mar 18, 2013 3:21 pm ]
Post subject:  Re: -12mm backspacing too much?

english, 12 mm ??
we use inches here :ROTFL:
8 inch wide wheel is a little too wide but it will work
12 mm = .0.4724409444 inches
need 5 inches or so with 8 inch wide wheel
4 inches of Back spacing and 7 inch wide wheel sits the wheel/tire right to the edge of the flare

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/