[quote][/quote]http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=34683 I just did mine similar to this but I don't have any pics but here is one thread of many discussing this. Good Luck
Pics when tires are on and your done 
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Maxxis MT762 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=78855 |
Page 1 of 1 |
| Author: | LS12FAST4U [ Tue Apr 15, 2014 11:14 pm ] |
| Post subject: | Maxxis MT762 |
Ordered the tires today from my local Les Schwab. I'm going with 265 75 16 in a 6 ply. Was wondering if anyone has ran these tires and what they think about them? I'm limited to what I can spend and I already have a charge account with this shop. I thought about Duratracs but they are not a goodyear dealer so they can only get them for 280 a tire. Obviously I'm not spending 280 a tire when discount tire is selling them for 190 a tire and a mail in rebate of 60 bucks. Anyway I asked Les Schwab to match the price on the Duratracs but they said they couldn't so I'm stuck with the Maxxis. |
|
| Author: | tommudd [ Wed Apr 16, 2014 7:23 am ] |
| Post subject: | Re: Maxxis MT762 |
Big tire for just a spacer lift and no mention of a regear Good luck, one of the local guys ran them when he went trail riding |
|
| Author: | LS12FAST4U [ Wed Apr 16, 2014 9:45 am ] |
| Post subject: | Re: Maxxis MT762 |
I forgot I haven't updated my signature. I ditched the spacer lift and went ome springs with extra isolators and a clevis lift also added 4.10's. I haven't installed the gears yet but will be in the next few weeks. . |
|
| Author: | tommudd [ Thu Apr 17, 2014 9:25 am ] |
| Post subject: | Re: Maxxis MT762 |
LS12FAST4U wrote: I forgot I haven't updated my signature. I ditched the spacer lift and went ome springs with extra isolators and a clevis lift also added 4.10's. I haven't installed the gears yet but will be in the next few weeks. . Sounds like you are ready then!! |
|
| Author: | LS12FAST4U [ Thu Apr 17, 2014 6:34 pm ] |
| Post subject: | Re: Maxxis MT762 |
Had to trim the pinch weld since I didn't need to do it with the 245/75 and I had to trim the inner fender a little by the washer fluid reservoir but it looks awesome. I will try to post up pics once I figure it out lol. Also I think I will be moving the washer reservoir. i think there was a write up on it wasn't there? I searched and just found threads of people saying they did it or ripped theirs off. If anyone has the link for the how to that would be great. |
|
| Author: | JdubKJ03 [ Thu Apr 17, 2014 6:42 pm ] |
| Post subject: | Re: Maxxis MT762 |
[quote][/quote]http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=34683 I just did mine similar to this but I don't have any pics but here is one thread of many discussing this. Good Luck Pics when tires are on and your done
|
|
| Author: | LS12FAST4U [ Thu Apr 17, 2014 11:49 pm ] |
| Post subject: | Re: Maxxis MT762 |
Thanks for the link. Definitely will get pics up. It started raining really hard so I'm waiting to finish up trimming till tomorrow. |
|
| Author: | LS12FAST4U [ Sat Apr 19, 2014 11:43 pm ] |
| Post subject: | Re: Maxxis MT762 |
I'm getting a small amount of rubbing on my sway bar. What did you guys do to fix it? It's minimal so I was thinking about some small wheel spacers? |
|
| Author: | WHITE the civilian [ Sat Apr 26, 2014 4:24 pm ] |
| Post subject: | Re: Maxxis MT762 |
I posted in your other thread about wheel spacers. Good luck with not tearing your flares off! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|