| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Black Rock wheel question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=81184 |
Page 1 of 1 |
| Author: | Balance156 [ Fri Jan 23, 2015 10:27 pm ] |
| Post subject: | Black Rock wheel question |
I have the OME spring lift for my CRD KJ. Also have 31x10.5 15 Duratracs on order and want the following wheels which are 15x7 with 4.5" back spacing. Obviously 5 bolt by 4.5. http://www.jeep4x4center.com/black-rock ... 71242.html How do I know if these wheels will fit over the calipers? I've read it's hit and miss with the 15" wheels. |
|
| Author: | tommudd [ Sat Jan 24, 2015 8:48 pm ] |
| Post subject: | Re: Black Rock wheel question |
Balance156 wrote: I have the OME spring lift for my CRD KJ. Also have 31x10.5 15 Duratracs on order and want the following wheels which are 15x7 with 4.5" back spacing. Obviously 5 bolt by 4.5. http://www.jeep4x4center.com/black-rock ... 71242.html How do I know if these wheels will fit over the calipers? I've read it's hit and miss with the 15" wheels. Should fit OK, its mainly stock 15 inch wheels where there is problems, aftermarket not so much |
|
| Author: | Balance156 [ Sun Jan 25, 2015 3:16 pm ] |
| Post subject: | Re: Black Rock wheel question |
Thanks, Tom. I see you have Duratracs... Any advice on rotation rate and pattern? I have 5 on order. |
|
| Author: | Balance156 [ Mon Feb 02, 2015 1:42 am ] |
| Post subject: | Re: Black Rock wheel question |
Got the wheels and tires on and took her out for some serious wheelin'... Flexing it as much as possible. Trimmed a lot  Wheels fit perfectly. Zero issues fitting calipers in them. Extremely happy with my choice. Also haven't seen a liberty with these wheels other than mine 
|
|
| Author: | tommudd [ Mon Feb 02, 2015 11:40 am ] |
| Post subject: | Re: Black Rock wheel question |
Balance156 wrote: Got the wheels and tires on and took her out for some serious wheelin'... Flexing it as much as possible. Trimmed a lot Wheels fit perfectly. Zero issues fitting calipers in them. Extremely happy with my choice. Also haven't seen a liberty with these wheels other than mine I have over 84,000 on the Duratracs now. Rears straight up to the front, fronts crossed over to the rear ( left front becomes right rear etc ) Do you have bumpstops in, shouldn't be any or not much trimming except for pounding over the pinchweld |
|
| Author: | Balance156 [ Tue Feb 03, 2015 2:28 am ] |
| Post subject: | Re: Black Rock wheel question |
Had to trim a decent amount out of the front of the inner front fender wells. Had issues cranking wheels in reverse over my steep driveway apron. Attacked it again with the dremel tonight and it's all fixed up now. Zero rubbing. Once I figure out how to post pics I'll put a bunch up. Looking forward to showing off the rig. And the Duratracs are amazing. I had zero tire noise and they have a high level of grip on and off road. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|