LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
2007-11 Ford Ranger wheels, help me understand "Et12" http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=85613 |
Page 1 of 1 |
Author: | Function > Form [ Sun Nov 20, 2016 8:53 am ] |
Post subject: | 2007-11 Ford Ranger wheels, help me understand "Et12" |
OK so they look a bit like Rubicon rims, but have 5*4.5 and are ET12. I cannot figure out what the backspacing would be? I tried a few calculators and think i figured out it's a bit less than 4", is that right? ELI5. Like this wheel https://goo.gl/images/Pt5Siy Thanks all. |
Author: | Function > Form [ Sun Nov 20, 2016 8:58 am ] |
Post subject: | Re: 2007-11 Ford Ranger wheels, help me understand "Et12" |
Answered my own question lol http://www.fordrangerforum.com/wheels-a ... harts.html Et12 = about 4.5" which means it'll rub more than stock because it is a half inch too far in right? |
Author: | tommudd [ Sun Nov 20, 2016 3:04 pm ] |
Post subject: | Re: 2007-11 Ford Ranger wheels, help me understand "Et12" |
Stock are 5 inches Ford Ranger and Explorer wheels are either 4 or 4.5 inches of backspacing Thing to check though is the center bore of the wheel, Ford is much smaller Ford is 70.3 , JEEPs are 71.6 |
Author: | Function > Form [ Mon Nov 21, 2016 12:01 pm ] |
Post subject: | Re: 2007-11 Ford Ranger wheels, help me understand "Et12" |
OK, so that means this will push the face of the wheel outwards by 0.5" - 1" from stock. Cool. Yes, I was wondering about the centre bore also, thanks Tom! I'll have to get a machine shop bore them out if I can find some nice wheels locally for a couple bucks. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |