LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Quick question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=89250 |
Page 1 of 1 |
Author: | 03kjlib [ Mon Sep 17, 2018 12:04 pm ] |
Post subject: | Quick question |
My friend just gave me his 255/70R18 (32"x10") off his Wrangler 09.. what do I have to do to make them fit my 03 liberty.. thanks in advance .. |
Author: | lfhoward [ Mon Sep 17, 2018 3:29 pm ] |
Post subject: | Re: Quick question |
Several things. First you’ll need Spidertrax spacers to adapt the bolt pattern of the JK rims to fit your Liberty. For a 32” tire that is as wide as yours, plus spacers, you’re looking at needing a minimum 4” lift, if not more, to prevent terrible rubbing issues. You’ll have to pound over the punch welds also. Last, you’ll need to regear your differentials to 4.10’s to be able to retain any power and gas mileage. You could do a lot better $$$-wise with 31’s on stock rims, a quality 2” lift kit, and no regear required (although it would help). You could sell the Wrangler 32’s and get part of the way there. Sorry, this is probably not what you wanted to hear. |
Author: | 03kjlib [ Tue Sep 18, 2018 12:13 am ] |
Post subject: | Re: Quick question |
Thank you.. that's exactly what I wanted to hear.. it sucks but that's how it goes.. thanks again for quick response |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |