It is currently Fri Feb 03, 2023 7:34 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: 2008 Voyager 2.8 CRD crankshaft sensor?
PostPosted: Sat Feb 05, 2022 11:48 am 
Offline
LOST Newbie

Joined: Mon Jan 24, 2022 6:16 am
Posts: 2
Hi,

my 2008 Voyager won't start, it has a P0366 code.
It has a 2.8 CRD (VM motori VM64C) engine.
The camshaft sensor has been changed with no success.
Do you happen to know where is the crankshaft sensor?

Thanks for your help.


Top
 Profile  
 
 Post subject: Re: 2008 Voyager 2.8 CRD crankshaft sensor?
PostPosted: Sat Feb 05, 2022 1:04 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 6820
Location: Central GA
CPS is located on right side of engine below exhaust manifold as shown in picture 1.
There is a heat shield that must be removed to gain access to the electrical connector and the sensor as shown in picture 2.

Picture 1.
Image

Picture 2.
Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: 2008 Voyager 2.8 CRD crankshaft sensor?
PostPosted: Sun Feb 06, 2022 12:22 pm 
Offline
LOST Newbie

Joined: Mon Jan 24, 2022 6:16 am
Posts: 2
Thank you WWDiesel.
It is different on my engine, but I finally found it.
It is under the member supporting the engine mount.


Top
 Profile  
 
 Post subject: Re: 2008 Voyager 2.8 CRD crankshaft sensor?
PostPosted: Sat Jan 14, 2023 7:18 pm 
Offline
LOST Addict

Joined: Sat Apr 17, 2010 3:29 pm
Posts: 1127
Raymonk wrote:
Thank you WWDiesel.
It is different on my engine, but I finally found it.
It is under the member supporting the engine mount.



Hello, Raymonk:

The CRD engine in your Voyager is transversely mounted; yes?

If so, I would be VERY interested in an old, non-functioning, O.E. engine thermostat assembly.

If you have one or if you can secure one, please let me know. I want to modify my Hot Diesel Solutions Model 001 engine thermostat assembly to be used with transversely mounted engines as the hose barbs go in different directions than the thermostat assembly on longitudinally mounted engines.

PM and e-mail sent.

Jeff Bauer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com