2008 Voyager 2.8 CRD crankshaft sensor?

Raymonk · **Joined:** Mon Jan 24, 2022 6:16 am **Posts:** 2

Hi,

my 2008 Voyager won't start, it has a P0366 code.
It has a 2.8 CRD (VM motori VM64C) engine.
The camshaft sensor has been changed with no success.
Do you happen to know where is the crankshaft sensor?

Thanks for your help.

WWDiesel · **Posted:** Sat Feb 05, 2022 1:04 pm

CPS is located on right side of engine below exhaust manifold as shown in picture 1.
There is a heat shield that must be removed to gain access to the electrical connector and the sensor as shown in picture 2.

Picture 1.

Picture 2.

Raymonk · **Joined:** Mon Jan 24, 2022 6:16 am **Posts:** 2

Thank you WWDiesel.
It is different on my engine, but I finally found it.
It is under the member supporting the engine mount.

TURBO-DIESEL-FREAK · **Joined:** Sat Apr 17, 2010 3:29 pm **Posts:** 1137

Raymonk wrote:

Thank you WWDiesel.
It is different on my engine, but I finally found it.
It is under the member supporting the engine mount.

Hello, Raymonk:

The CRD engine in your Voyager is transversely mounted; yes?

If so, I would be VERY interested in an old, non-functioning, O.E. engine thermostat assembly.

If you have one or if you can secure one, please let me know. I want to modify my Hot Diesel Solutions Model 001 engine thermostat assembly to be used with transversely mounted engines as the hose barbs go in different directions than the thermostat assembly on longitudinally mounted engines.

PM and e-mail sent.

Jeff Bauer

2008 Voyager 2.8 CRD crankshaft sensor?

Who is online