PhilKK wrote:
I was under the impression that they used the 4" jba springs for the econo lift.
I thought things have changed with what was included in the econo lift.
I want what will give me the least issues(of the econo/ome lift) So impart you knowledge haha.
Sure just buy the OME kit with front shocks and make sure rear shocks are the 132Ls
Then add a 1/4 inch top plate in front for a 3 inch lift
rear add one extra upper iso per side
level front to rear
NOW you can add some clevis to the front But like I stated many times you get to 3.25-3.5 inches in front you can and will have some upper contact between the spring and UCA, no matter if you have the JBA arms or not, some hit more than others
Oh and of course proper bumpstops