It is currently Thu Mar 28, 2024 4:11 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: brake rotors
PostPosted: Sat Nov 27, 2021 11:40 am 
Offline
LOST Newbie

Joined: Sun Apr 03, 2016 8:41 am
Posts: 53
Can the front brake rotors be turned or are they to thin?
I have a pulsing feel when I apply the brakes.
thanks Gary


Top
 Profile  
 
 Post subject: Re: brake rotors
PostPosted: Sat Nov 27, 2021 12:14 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
yellkayak wrote:
Can the front brake rotors be turned or are they to thin?
I have a pulsing feel when I apply the brakes.
thanks Gary

They can be machined if they are not worn too thin. There is a minimum allowable thickness cast into the rotor. (*1. see information below)
But due to the lower cost now days of new rotors, most believe it is more cost efficient to just purchase new rotors and not have to go to all the trouble of machining old rotors. :wink:

*1. wrote:
Engraved on the side of your rotor you can find the minimum operational thickness. To accurately measure against the minimum thickness use a micrometer at the thinnest point on the surface of the rotor where it meets the pads. If your rotor needs to be cut or has worn passed this thickness, you'll need new rotors.
Consequently, what is the minimum thickness of a rotor?

All brake discs or rotors have markings for MINIMUM allowable thickness cast on an unmachined surface or an alternate surface.
The rotor's minimum thickness tells you the minimum operational level of your rotor. This level can be found engraved on the sides of the rotor, within the veins of the rotor, or on the hat of the rotor.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com