AT THE HELM KK SWITCH PODS- WHO WANTS ONE?

huntb · **Posted:** Tue Jan 28, 2014 3:15 pm

Texasrugby911 by any chance, can you take a picture from the side? I would like to see the slope on it

Rescue575 · **Posted:** Thu Jan 30, 2014 3:06 pm

btalyor218 wrote:

I did it a few years ago (it's been a while since I checked the USA forums!) its just galvanised sheet with vinyl glued to it. Fits 5 switches, LPG gauge and UHF mount easily. I had spare vinyl from the roof console I made, was the same colour as the dash

Sent from my GT-N7105T using Tapatalk

Where did you get the vinyl wrap from. That is the charcoal color interior correct?

Rescue575 · **Posted:** Fri Jan 31, 2014 1:56 pm

Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

Rescue575 · **Posted:** Fri Jan 31, 2014 1:58 pm

Rescue575 wrote:

Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

I apologize for changing the topic, I can switch to a new thread if prefer!

huntb · **Posted:** Sat Feb 01, 2014 10:18 pm

Rescue575 wrote:

Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

As long as you have the right gauge wire you should be fine. If the bulbs are LED you wouldn't need anything larger than 18-20AWG. Make sure you run them in parallel though.

brdkey · **Joined:** Fri Oct 12, 2012 9:24 pm **Posts:** 144

I like

Sent from my iPhone using Tapatalk

Rescue575 · **Posted:** Tue Feb 04, 2014 11:33 pm

huntb wrote:

Rescue575 wrote:

Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

As long as you have the right gauge wire you should be fine. If the bulbs are LED you wouldn't need anything larger than 18-20AWG. Make sure you run them in parallel though.

I'm sorry, like I said, I am clueless. What do you mean by parallel?

At The Helm · **Posted:** Tue Feb 04, 2014 11:46 pm

Sorry I don't have an update with these yet. My parts cutter lost his one employee and hasn't had time to start these yet.

Rescue575 · **Posted:** Wed Feb 05, 2014 3:06 pm

Take your time brother. We're not going anywhere!

2011 Liberty Sport
KC slim LR 130w on bumper, Cobra 78, firestik, Dunlop Fierce Attitude.

huntb · **Posted:** Wed Feb 05, 2014 4:47 pm

Rescue575 wrote:

huntb wrote:

Rescue575 wrote:

Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

As long as you have the right gauge wire you should be fine. If the bulbs are LED you wouldn't need anything larger than 18-20AWG. Make sure you run them in parallel though.

I'm sorry, like I said, I am clueless. What do you mean by parallel?

You may want to ask for professional installation then :shock:

Bring in the power and go to each individual switch instead of going from one switch to the other

brdkey · **Joined:** Fri Oct 12, 2012 9:24 pm **Posts:** 144

Atthehelm wrote:

Sorry I don't have an update with these yet. My parts cutter lost his one employee and hasn't had time to start these yet.

That's ok. I have no lights yet so...!

Sent from my iPhone using Tapatalk

Rescue575 · **Posted:** Wed Feb 05, 2014 6:38 pm

huntb wrote:

Rescue575 wrote:

huntb wrote:

[quote="Rescue575"]Ok. Looking into the future when Morgan gets these done. Since I am not proficient in electrical anything...is there a way to run on "hot" wire up and jump them to each switch so I won't have to run 6 individual power leads? Same thing for the grounds? Or would that be pushing it on the capacity of the wire?

As long as you have the right gauge wire you should be fine. If the bulbs are LED you wouldn't need anything larger than 18-20AWG. Make sure you run them in parallel though.

I'm sorry, like I said, I am clueless. What do you mean by parallel?

You may want to ask for professional installation then :shock:

Bring in the power and go to each individual switch instead of going from one switch to the other[/quote]
I'm not that bad! Lol. If I know what I have to do, then I can get it done. Just don't know the terms. Basically what your saying is one line in then split it to each switch.

2011 Liberty Sport
KC slim LR 130w on bumper, Cobra 78, firestik, Dunlop Fierce Attitude.

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

Any word??

At The Helm · **Posted:** Sat Feb 15, 2014 5:13 pm

I'm supposed to be getting the prototype in next week.

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

Sweet

Vards · **Joined:** Thu Oct 13, 2011 6:18 pm **Posts:** 39

Texasrugby911 wrote:

Sorry it's taken me so long everyone, but here is my bank.

I worked with the folks over at otrattw.com to have the KK front vector cut into the switches.

All those switches and no locker switch!

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

Any word

Rescue575 · **Posted:** Thu Mar 06, 2014 8:52 pm

Think I asked already but don't recall a response. Anyone know where you can get a wrap for the switch housing that would match the look and feel off the charcoal interior?

2011 Liberty Sport
KC slim LR 130w on bumper, Cobra 78, firestik, Dunlop Fierce Attitude.

LKWJeeper · **Posted:** Thu Mar 06, 2014 9:19 pm

Could you try a fabric store?

Sent from my LG-D801 using Tapatalk

At The Helm · **Posted:** Thu Mar 06, 2014 10:25 pm

Maybe try ebay Rescue. You might have a hard time finding the same dash "texture" though.

Sorry these are taking so long guys. The guy I have cutting parts for me is swamped with his own fabrication business (side hobby from his day job). Getting parts cut from 1/4" isn't a problem because its always on the cnc table, but the thin stuff he doesn't normally deal with so he needs to prioritize..

AT THE HELM KK SWITCH PODS- WHO WANTS ONE?

Who is online