What have you done to your KK lately

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

Yeah, I'll need to buy a new a pillar trim...sigh...

CollinKK · **Posted:** Mon Apr 06, 2015 6:59 am

NAMoulton1 wrote:

Yeah, I'll need to buy a new a pillar trim...sigh...

Maybe silverkk didn't hack his up making his prototype

libertygirl09 · **Posted:** Mon Apr 06, 2015 7:52 pm

NAMoulton1 wrote:

Yeah, I'll need to buy a new a pillar trim...sigh...

Need a smaller rocker switch

I installed mine like this and they work great ! And I can add several more

libertygirl09 · **Posted:** Mon Apr 06, 2015 7:54 pm

Bmxer524 wrote:

I'm thinking its clogged. It only happened under high pressure. It didn't lesk during any of these rain storms the past few days... My dad and I are gonna take a look tomorrow. Maybe he'll be able to spot them.

If anyone happens to know where it is on a skyslider feel free to tell lol.

nFodzy, I think only sunroof/skyslider models have that overhead console.

My leak is bad on the passenger a-pillar and that console. It leaked out of 1 of the gaps when driving home and when I got home I noticed a water stain on the front closer to the windshield.

Have you used the info I gave you? Cause my leak is so far 100% gone. (For now) and I told you the stain washes out

Bmxer524 · **Posted:** Mon Apr 06, 2015 8:02 pm

libertygirl09 wrote:

Bmxer524 wrote:

I'm thinking its clogged. It only happened under high pressure. It didn't lesk during any of these rain storms the past few days... My dad and I are gonna take a look tomorrow. Maybe he'll be able to spot them.

If anyone happens to know where it is on a skyslider feel free to tell lol.

nFodzy, I think only sunroof/skyslider models have that overhead console.

My leak is bad on the passenger a-pillar and that console. It leaked out of 1 of the gaps when driving home and when I got home I noticed a water stain on the front closer to the windshield.

Have you used the info I gave you? Cause my leak is so far 100% gone. (For now) and I told you the stain washes out

I did. We couldn't find the drain tube for it though. I'm not sure if there are any for the sky slider since it closes tight and has channels to let water flow out onto the roof. I even ran a hose on the top/windshield to see if it would leak again and it didn't. Now it just comes down to finding time to clean the stain.

libertygirl09 · **Posted:** Mon Apr 06, 2015 8:05 pm

Off-roading pics ...

Jeep on !

RMarine · **Joined:** Sun Dec 15, 2013 9:53 pm **Posts:** 5

Changed out my toggle switch for my roof LED's. Bright lights at night always work well! I do have it wired into my dimmer switch, which I love.

http://s5.photobucket.com/user/rmegee/m ... 1.jpg.html

JeepMonkey190 · **Posted:** Tue Apr 07, 2015 11:26 am

So I'm getting new headlights but I'm debating on HID's or CREE LED's both kits come with everything needed

6000k HID's = $30 (just low beam)
= $50 (Hi/Low beam)
35w = 3200-3400 Lumens
50w = 5000 Lumens (+$10)

25w CREE LED's = $150
3200 -3400 Lumens

What do you guys think?

dcbelcher26 · **Posted:** Tue Apr 07, 2015 11:32 am

I would go with the hi/low beam 50w HIDs just because they have the higher lumens. Where are you looking at these?

Sent from my iPhone using Tapatalk

JeepMonkey190 · **Posted:** Tue Apr 07, 2015 12:04 pm

We use the H13 bulb

HID's
http://www.ddmtuning.com/Products/DDM-H ... 35W-or-55W

LED's
https://www.customwheeloffset.com/custo ... g-and-play

dcbelcher26 · **Posted:** Tue Apr 07, 2015 12:19 pm

You got me thinking about getting the HIDs now haha

Sent from my iPhone using Tapatalk

PALiftedKK · **Posted:** Tue Apr 07, 2015 2:32 pm

NAMoulton1 wrote:

Very productive day with the Jeep haha. Finally installed my 300W power inverter in the jack storage spot. Took me a while to tear apart the trim for the trunk to run the cables through there. (Yes the faceplate is ziptied...works like a champ though haha). The inverter is mounted onto the unibody via 3M double sided tape.

why not install a regular outlet with a new construction box? it would look so much cleaner. get a metal face plate and heat it up then form it to the contours.

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

PALiftedKK wrote:

NAMoulton1 wrote:

Very productive day with the Jeep haha. Finally installed my 300W power inverter in the jack storage spot. Took me a while to tear apart the trim for the trunk to run the cables through there. (Yes the faceplate is ziptied...works like a champ though haha). The inverter is mounted onto the unibody via 3M double sided tape.

why not install a regular outlet with a new construction box? it would look so much cleaner. get a metal face plate and heat it up then form it to the contours.

Because I'd still need a switch and why buy those when I already have one attached to the power inverter haha.

TIJKK1220 · **Posted:** Tue Apr 07, 2015 10:05 pm

Had a pretty busy day today.

Gave BlacKKat some new shoes and repainted my rims. Goodyear Wrangler MT/R Kevlar 245/75/16

Heavy buggars but they ride like silk compared to my 255/70/17 Cooper discoverers

PALiftedKK · **Posted:** Tue Apr 07, 2015 10:34 pm

NAMoulton1 wrote:

PALiftedKK wrote:

NAMoulton1 wrote:

Very productive day with the Jeep haha. Finally installed my 300W power inverter in the jack storage spot. Took me a while to tear apart the trim for the trunk to run the cables through there. (Yes the faceplate is ziptied...works like a champ though haha). The inverter is mounted onto the unibody via 3M double sided tape.

why not install a regular outlet with a new construction box? it would look so much cleaner. get a metal face plate and heat it up then form it to the contours.

Because I'd still need a switch and why buy those when I already have one attached to the power inverter haha.

throw the switch in the front with the rest of the switches.

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

PALiftedKK wrote:

throw the switch in the front with the rest of the switches.

Not to into that idea because then I'd have to run 22AWG cables up to the front to for the switch...it's all integrated into a single unit. Here's the Amazon link: Go Power! GP-300 300-Watt Modified Sine Wave Inverter https://www.amazon.com/dp/B00153BH6M/re ... jvb0VQZMKF

Cherrie 274 · **Posted:** Tue Apr 07, 2015 10:52 pm

Put it up for sale.

JeepMonkey190 · **Posted:** Tue Apr 07, 2015 11:39 pm

TIJKK1220 wrote:

Had a pretty busy day today.

Gave BlacKKat some new shoes and repainted my rims. Goodyear Wrangler MT/R Kevlar 245/75/16

Heavy buggars but they ride like silk compared to my 255/70/17 Cooper discoverers

Very nice is that just spray paint or plasti dip?

TIJKK1220 · **Posted:** Wed Apr 08, 2015 12:24 am

Plasti Dip

lfhoward · **Posted:** Wed Apr 08, 2015 12:13 pm

Cherrie 274 wrote:

Put it up for sale.

Wow, so what will be replacing it that can haul your kayaks?

What have you done to your KK lately

Who is online