| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Brake rotor heat shield http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=36900 |
Page 1 of 1 |
| Author: | bigmooze [ Sun Oct 19, 2008 4:13 pm ] |
| Post subject: | Brake rotor heat shield |
I've read about heating from the brake rotors in previous versions of the Liberty, causing heat damage to ball joints. I took a look at the rotors on my 2008 KK and noticed some thin (approx. 1.5 mm?) aluminum shields - are these installed to dissipate heat from the rotors during braking? |
|
| Author: | Sartori [ Sun Oct 19, 2008 5:38 pm ] |
| Post subject: | |
Well, not only during braking but just plain driving without braking.....If you ever touched a brake rotor after cruising down the highway you'll know what I mean..... |
|
| Author: | Diggerfreek [ Sun Oct 19, 2008 5:55 pm ] |
| Post subject: | |
They are not meant to be heat sinks, but rather air deflectors to mave cool fresh air across the pads and rotors and as an insulator to the ball joints/tie rod |
|
| Author: | greenjeepster [ Mon Oct 20, 2008 4:41 am ] |
| Post subject: | |
Quote: Well, not only during braking but just plain driving without braking.....If you ever touched a brake rotor after cruising down the highway you'll know what I mean.....
how do you touch it with out braking? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|